ICP-OES Method for the Determination of Fe, Co, Mn, Cu, Pb, and Zn in Ore Samples From the Keban Region Using Experimental Design and Optimization Methodology

Basit Öğe Kaydı
dc.contributor.authorOrala, Elif Varhan
dc.contributor.authorZiyadanogullari, Berrin
dc.contributor.authorAydin, Firat
dc.contributor.authorDinc, Erdal
dc.contributor.authorZiyadanogullari, Recep
dc.date.accessioned2024-04-24T17:24:45Z
dc.date.available2024-04-24T17:24:45Z
dc.date.issued2016
dc.departmentDicle Üniversitesien_US
dc.description.abstractA new approach based on the use of inductively coupled plasma optical emission spectrometry (ICP-OES) is presented for the quantitative determination of Fe, Co, Mn, Cu, Pb, and Zn in ore samples obtained from the Keban Region, Turkey. A 33 full factorial design with 27 sample runs was used to find the optimal sequential extraction conditions for the analysis of these samples. Under optimized conditions for each step of the sequential extraction procedure, calibration curves for the respective metals were obtained by measuring the absorbance values at 238.2 nm for Fe, 228.6 nm for Co, 257.6 nm for Mn, 327.4 nm for Cu, 220.4 nm for Pb, and 206.2 nm for Zn. The proposed ICP-OES method was successfully applied to the quantitative analysis of real ore samples containing Fe, Co, Mn, Cu, Pb, and Zn. Good agreement was found for the analytical results of these metals.en_US
dc.identifier.doi10.46770/AS.2016.04.003
dc.identifier.endpage149en_US
dc.identifier.issn0195-5373
dc.identifier.issn2708-521X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-84992694899
dc.identifier.scopusqualityQ2
dc.identifier.startpage142en_US
dc.identifier.urihttps://doi.org/10.46770/AS.2016.04.003
dc.identifier.urihttps://hdl.handle.net/11468/19820
dc.identifier.volume37en_US
dc.identifier.wosWOS:000383732000003
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherAtomic Spectroscopy Press Ltden_US
dc.relation.ispartofAtomic Spectroscopy
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subject[No Keyword]en_US
dc.titleICP-OES Method for the Determination of Fe, Co, Mn, Cu, Pb, and Zn in Ore Samples From the Keban Region Using Experimental Design and Optimization Methodologyen_US
dc.titleICP-OES Method for the Determination of Fe, Co, Mn, Cu, Pb, and Zn in Ore Samples From the Keban Region Using Experimental Design and Optimization Methodology
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu