ICP-OES Method for the Determination of Fe, Co, Mn, Cu, Pb, and Zn in Ore Samples From the Keban Region Using Experimental Design and Optimization Methodology
[ X ]
Tarih
2016
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Atomic Spectroscopy Press Ltd
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
A new approach based on the use of inductively coupled plasma optical emission spectrometry (ICP-OES) is presented for the quantitative determination of Fe, Co, Mn, Cu, Pb, and Zn in ore samples obtained from the Keban Region, Turkey. A 33 full factorial design with 27 sample runs was used to find the optimal sequential extraction conditions for the analysis of these samples. Under optimized conditions for each step of the sequential extraction procedure, calibration curves for the respective metals were obtained by measuring the absorbance values at 238.2 nm for Fe, 228.6 nm for Co, 257.6 nm for Mn, 327.4 nm for Cu, 220.4 nm for Pb, and 206.2 nm for Zn. The proposed ICP-OES method was successfully applied to the quantitative analysis of real ore samples containing Fe, Co, Mn, Cu, Pb, and Zn. Good agreement was found for the analytical results of these metals.
Açıklama
Anahtar Kelimeler
[No Keyword]
Kaynak
Atomic Spectroscopy
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
37
Sayı
4
