Linear correlation between barrier heights and ideality factors of Sn/n-Si schottky diodes with and without the interfacial native oxide layer
[ X ]
Tarih
2003
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
We have prepared the Sn/n-Si Schottky barrier diodes (SBDs) with and without the native oxide layer. The diodes with or without the native oxide layer have been identically fabricated on the same Si wafer. The effective Schottky barrier heights (SBHs) and ideality factors of the SBDs have been obtained from the current-voltage (I-P) characteristics. Our purpose is experimentally to show whether or not the effective SBHs and ideality factors of the identically fabricated diodes differ from diode to diode. The SBH Phi(b) for the Sn/n-Si SBI)s without the interfacial oxide layer (the reference sample) has ranged from 0.670 to 0.599 eV, and ideality factor n from 1.349 to 2.558. Phi(b) value for the Sn/n-Si SBDs with the interfacial oxide layer (metal interfacial layer-semiconductor (MIS) sample) has ranged from 0.647 to 0.560eV, and ideality factor n value from 1.381 to 2.777. Among identically prepared diodes, higher ideality factors have been found to accompany lower SBHs. Furthermore, the extrapolations of the linear plot the experimental barrier heights (BHs) versus ideality factors to the ideality factor have given the laterally homogeneous BHs of approximately 0.683 and 0.656eV for the reference and MIS Sn/n-Si SBDs. (C) 2003 Elsevier B.V. All rights reserved.
Açıklama
Anahtar Kelimeler
Schottky Barrier, Metal-Semiconductor Contact, The Interfacial Layer, Barrier Inhomogeneity
Kaynak
Physica B-Condensed Matter
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
337
Sayı
1-4
