Prediction of the tensile load of drilled CFRP by artificial neural network
Yükleniyor...
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
MDPI AG
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The application areas of carbon fiber reinforced plastics (CFRP) have been increasing day by day. The machining of CFRP with incorrect machining parameters leads in huge loss cost and time. Therefore, it is very important that the composite materials are machined with correct machining parameters. The aim of this paper is to examine the influence of drilling parameters on tensile load after drilling of CFRP. The drilling operations were carried out on Computer Numerical Control (CNC) by Tungsten Carbide (WC), High Speed Steel (HSS) and Brad Spur type drill bits with spindle speeds of 1000, 3000 and 5000 rpm and feed rates of 0.05, 0.10 and 0.15 mm/rev. The results indicate that the surface roughness, delamination and thrust force, were affected by drilling parameters therefore tensile load was also affected by the same parameters. It was observed that increase in surface roughness, delamination and thrust force all lead to the decrease of tensile load of CFRP. If the correct drilling parameters are selected; the decrease in tensile load of CFRP can be saved up to 25%. Furthermore, an artificial neural network (ANN) model has been used to predict of tensile load. The results of the ANN model are in close agreement with the experimental results.
Açıklama
Anahtar Kelimeler
CFRP, Drilling, Surface roughness tensile load
Kaynak
Applied Sciences (Switzerland)
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
8
Sayı
4
Künye
Yenigün, B. ve Kılıckap, E. (2018). Prediction of the tensile load of drilled CFRP by artificial neural network. Applied Sciences (Switzerland), 8(4).
