Effect of Temperature, Force, and Vibration on Fatigue Strength of Friction Stir-Welded AA7075 Aluminum Alloy Joints

Basit Öğe Kaydı
dc.contributor.authorCetkin, Edip
dc.contributor.authorCelik, Yahya Hisman
dc.contributor.authorKilickap, Erol
dc.date.accessioned2024-04-24T16:02:31Z
dc.date.available2024-04-24T16:02:31Z
dc.date.issued2021
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn this study, the AA7075 alloy pairs were welded by friction stir welding method by using conical- and triangular-type stirrer pins. Welding forces and moments, vibration, and temperature values have been measured during the jointing depending on the welding parameters. Finally, microstructures were examined and mechanical tests were carried out. Results obtained from the experiments revealed that at low spindle speed and welding feed rates, the temperatures formed on the surface of the alloy pair were high, the vibrations were low, and the welding force and moments were partially high. When the microstructures of the welded areas are examined, it was determined that the conical mixing pin has a better microstructure than the triangular mixing pin. In addition, it was determined that the mechanical properties of welded joints having a good microstructure were quite good. As a result, it was observed that forces during welding, temperature of welding, and vibration values have an effect on microstructure and mechanical properties.en_US
dc.identifier.doi10.1007/s11665-020-05436-y
dc.identifier.endpage211en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85098940063
dc.identifier.scopusqualityQ2
dc.identifier.startpage202en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-020-05436-y
dc.identifier.urihttps://hdl.handle.net/11468/14821
dc.identifier.volume30en_US
dc.identifier.wosWOS:000604853400015
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performance
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFatigueen_US
dc.subjectForceen_US
dc.subjectFswen_US
dc.subjectTemperatureen_US
dc.subjectVibrationen_US
dc.titleEffect of Temperature, Force, and Vibration on Fatigue Strength of Friction Stir-Welded AA7075 Aluminum Alloy Jointsen_US
dc.titleEffect of Temperature, Force, and Vibration on Fatigue Strength of Friction Stir-Welded AA7075 Aluminum Alloy Joints
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu