Investigation of optimum cutting parameters and tool radius in turning glass-fiber-reinforced composite material

Basit Öğe Kaydı
dc.contributor.authorYardimeden, Ahmet
dc.date.accessioned2024-04-24T17:18:01Z
dc.date.available2024-04-24T17:18:01Z
dc.date.issued2016
dc.departmentDicle Üniversitesien_US
dc.description.abstractGlass-fiber-reinforced composite materials (GFRPs) are used widely in various fields of engineering. Turning is the principal process conducted on these materials for obtaining minimum surface roughness. Machining of GFRP materials is different from traditional style due to their inhomogeneous and anisotropic structures. Optimum machining parameters for specific GFRP materials need to be ascertained for perfect machining. In this study, the influence of cutting parameters and insert radius on the cutting force and surface roughness of GFRP material during machining was investigated. For measuring main cutting force, a three-component piezoelectric crystal type of dynamometer was used. Cutting force and surface roughness were experimentally measured through longitudinal axes of the GFRP material. Through this study, it was observed that high cutting speeds and low feed rates provide the best surface quality in the turning process of GFRP composite materials.en_US
dc.identifier.doi10.1515/secm-2013-0301
dc.identifier.endpage92en_US
dc.identifier.issn0792-1233
dc.identifier.issn2191-0359
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84954561862
dc.identifier.scopusqualityQ3
dc.identifier.startpage85en_US
dc.identifier.urihttps://doi.org/10.1515/secm-2013-0301
dc.identifier.urihttps://hdl.handle.net/11468/18546
dc.identifier.volume23en_US
dc.identifier.wosWOS:000367660100010
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofScience and Engineering of Composite Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectGfrpen_US
dc.subjectInsert Radiusen_US
dc.subjectSurface Roughnessen_US
dc.subjectTurningen_US
dc.titleInvestigation of optimum cutting parameters and tool radius in turning glass-fiber-reinforced composite materialen_US
dc.titleInvestigation of optimum cutting parameters and tool radius in turning glass-fiber-reinforced composite material
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu