Hardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC

Basit Öğe Kaydı
dc.contributor.authorCelik, Yahya Hisman
dc.contributor.authorKilickap, Erol
dc.date.accessioned2024-04-24T16:02:19Z
dc.date.available2024-04-24T16:02:19Z
dc.date.issued2019
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe conversion into the desired shape of the metal powders using Powder Metallurgy (PM) method enables economically mass productions. This case allows producing parts with complex and high dimensional accuracy with no machining. In this study the composites and hybrid composites with Al matrix were produced using PM method with different ratios B4C and SiC. Microhardness and wear experiments of the produced composites were investigated. Wear experiments were performed at a constant speed of 0.5 m/s, application loads of 5, 10 and 15 N and sliding distances of 250, 500, and 750 m. Then, SEM images of composites and hybrid composites were captured. The increase of the reinforcement ratio in the composites contributed to the increase of the hardness. The highest hardness value was computed as 58.7 HV from 16% B4C reinforced composite. In addition, the increase in the reinforcement ratio contributed to the increase of the wear resistance. The increase in the load and sliding distance also increased the wear. The minimum weight loss was calculated as 18 mg from 5 N load, 250 m sliding distance and 16% SiC reinforced composite.en_US
dc.identifier.doi10.1007/s11106-019-00023-w
dc.identifier.endpage622en_US
dc.identifier.issn1068-1302
dc.identifier.issn1573-9066
dc.identifier.issue9-10en_US
dc.identifier.scopus2-s2.0-85061895051
dc.identifier.scopusqualityQ2
dc.identifier.startpage613en_US
dc.identifier.urihttps://doi.org/10.1007/s11106-019-00023-w
dc.identifier.urihttps://hdl.handle.net/11468/14740
dc.identifier.volume57en_US
dc.identifier.wosWOS:000462031700015
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofPowder Metallurgy and Metal Ceramics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject[No Keyword]en_US
dc.titleHardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiCen_US
dc.titleHardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu