EXPERIMENTAL EVALUATION OF PARAMETERS AFFECTING DELAMINATION FACTOR, TENSILE STRENGTH, THRUST FORCE AND SURFACE ROUGHNESS IN DRILLING OF GFRP

Basit Öğe Kaydı
dc.contributor.authorKilickap, Erol
dc.contributor.authorCelik, Yahya Hisman
dc.contributor.authorYenigun, Burak
dc.date.accessioned2024-04-24T17:12:03Z
dc.date.available2024-04-24T17:12:03Z
dc.date.issued2023
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe drilling of glass fiber-reinforced plastic (GFRP) composites gained importance since they are used as structural components in many industries such as automotive, aerospace, and aviation. A large number of holes are needed in the industry to join these composite parts. However, some failures occur in drilling GFRP composites, such as delamination, matrix cracking, and fiber breakage. These failures not only reduce the strength of the composite, but also reduce its service life. Drilling parameters, drill bits, and woven types have a great influence on the occurrence of these failures by greatly influencing the thrust force, surface quality, and cutting temperature. In this study, the effects of drilling parameters and woven types of GFRP composites on thrust force, surface roughness, delamination factor, and cutting temperature were examined in the drilling of uni-directional (UD), +/- 45 degrees and 0 degrees/90 degrees GFRP woven composites. The effects of drilling parameters and the delamination factor on the tensile strength of the drilled specimen were also investigated. The result of this study indicated that thrust force, delamination factor, and surface roughness increased with increasing cutting speed and feed rate. An increase in feed rate decreased the cutting temperature, while an increase in cutting speed increased the cutting temperature. Also, it was found that the delamination factor had a critical influence on the tensile strength of the GFRP composites.en_US
dc.identifier.doi10.1142/S0218625X23500257
dc.identifier.issn0218-625X
dc.identifier.issn1793-6667
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85153961518
dc.identifier.scopusqualityQ3
dc.identifier.urihttps://doi.org/10.1142/S0218625X23500257
dc.identifier.urihttps://hdl.handle.net/11468/17832
dc.identifier.volume30en_US
dc.identifier.wosWOS:000964753900001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.ispartofSurface Review and Letters
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectGfrpen_US
dc.subjectTensile Strengthen_US
dc.subjectDelamination Factoren_US
dc.subjectThrust Forceen_US
dc.subjectSurface Roughnessen_US
dc.subjectTemperatureen_US
dc.subjectDrillingen_US
dc.titleEXPERIMENTAL EVALUATION OF PARAMETERS AFFECTING DELAMINATION FACTOR, TENSILE STRENGTH, THRUST FORCE AND SURFACE ROUGHNESS IN DRILLING OF GFRPen_US
dc.titleEXPERIMENTAL EVALUATION OF PARAMETERS AFFECTING DELAMINATION FACTOR, TENSILE STRENGTH, THRUST FORCE AND SURFACE ROUGHNESS IN DRILLING OF GFRP
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu