Laboratory and in situ investigations of tracking cutters for computer-aided design of shearer drums

Basit Öğe Kaydı
dc.contributor.authorHekimoglu, OZ
dc.contributor.authorAyhan, M
dc.contributor.authorTiryaki, B
dc.date.accessioned2024-04-24T17:37:36Z
dc.date.available2024-04-24T17:37:36Z
dc.date.issued2003
dc.departmentDicle Üniversitesien_US
dc.description.abstractThis paper discusses the aspects of tracking cutters related to the computer-aided design of shearer drums. A comprehensive computer analysis of drum dynamic parameters for multi-tracking tool arrangement is not presently available, as the current computer programs mainly consider the aspects of single tracking. Despite the fact that the single-tracking arrangement is recommended for efficient cutting, some major drum manufacturers have been seen to persistently adhere to multi-track-ing, probably due to a lack of information. Further studies in this field are believed to contribute greatly to the current understanding of the computer-aided design of shearer drums. A number of laboratory simulation trials and long-term underground investigations were carried out in detail on tracking cutter arrangement, and an equation required for a computer program was derived. The results obtained from computer assessment of dynamic parameters for drums with multi-tracking arrangement were found to be in accordance with those of the underground trials, indicating the validity of the equations. The procedure adopted for the computer appraisal of the shearer drums designed with a multi-tracking concept, as described in this study, Is therefore recommended to be considered in the currently employed computer programs.en_US
dc.identifier.endpage75en_US
dc.identifier.issn0317-0926
dc.identifier.issue1073en_US
dc.identifier.scopus2-s2.0-0242574627
dc.identifier.scopusqualityN/A
dc.identifier.startpage72en_US
dc.identifier.urihttps://hdl.handle.net/11468/21058
dc.identifier.volume96en_US
dc.identifier.wosWOS:000186213600009
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherCanadian Inst Mining Metallurgy Petroleumen_US
dc.relation.ispartofCim Bulletin
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTracking Cuttersen_US
dc.subjectComputer-Aided Designen_US
dc.subjectShearer Drumsen_US
dc.subjectTool Arrangementen_US
dc.titleLaboratory and in situ investigations of tracking cutters for computer-aided design of shearer drumsen_US
dc.titleLaboratory and in situ investigations of tracking cutters for computer-aided design of shearer drums
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu