The Decreasing of the Extrusion Time with Varying Ram Speed

Basit Öğe Kaydı
dc.contributor.authorBingol, Sedat
dc.date.accessioned2024-04-24T16:24:53Z
dc.date.available2024-04-24T16:24:53Z
dc.date.issued2015
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn the extrusion process, friction and workpiece deformation usually cause an increase in the temperature of the extrudate. During the stroke, this temperature increase may reach a critical level and restrict the ram speed. In this study, extrusion processes, which were conducted under real production conditions, were simulated at different ram speeds using finite element modeling. In this way, the maximum workable constant ram speed was determined according to a defined critical extrusion temperature as a reference value. In the next stage, new ram-speed models were developed as alternatives to the maximum-workable, constant ram speed. The results showed that the time taken to extrude could be significantly shortened by using these models.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkeyen_US
dc.description.sponsorshipThe financial support of The Scientific and Technological Research Council of Turkey is gratefully acknowledged.en_US
dc.identifier.doi10.1080/10426914.2015.1019110
dc.identifier.endpage1189en_US
dc.identifier.issn1042-6914
dc.identifier.issn1532-2475
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-84937024094
dc.identifier.scopusqualityQ1
dc.identifier.startpage1185en_US
dc.identifier.urihttps://doi.org/10.1080/10426914.2015.1019110
dc.identifier.urihttps://hdl.handle.net/11468/16885
dc.identifier.volume30en_US
dc.identifier.wosWOS:000357734500005
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofMaterials and Manufacturing Processes
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTimeen_US
dc.subjectSimulationsen_US
dc.subjectTemperatureen_US
dc.subjectFemen_US
dc.subjectAluminumen_US
dc.subjectExtrusionen_US
dc.subjectStrokeen_US
dc.subjectSpeeden_US
dc.subjectAnalysisen_US
dc.titleThe Decreasing of the Extrusion Time with Varying Ram Speeden_US
dc.titleThe Decreasing of the Extrusion Time with Varying Ram Speed
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu