Effect of denture cleansers on the roughness of heat-or auto cured denture liners

Basit Öğe Kaydı
dc.contributor.authorMese, Ayse
dc.date.accessioned2024-04-24T17:33:32Z
dc.date.available2024-04-24T17:33:32Z
dc.date.issued2008
dc.departmentDicle Üniversitesien_US
dc.description.abstractThis study investigated the effect of short (24 h) and long term (6 months) exposure to a variety of commercially available denture cleanser solutions on the roughness of a variety of acrylic-and silicone-based resilient liners that were either heat-or auto-cured. The denture liners investigated were an acrylic-based heat-cured (Vertex Soft), acrylic-based auto-cured (Coe-Soft), a silicon-based heat-cured (Molloplast-B) and silicon-based auto-cured (Mollosil Plus) resilient liners, Cylindirical specimens (14 mm dia, 1 mm replications for each high) were made of each material, using 10 re test condition, Immersion solutions consisted of distilled water (control) and those based on alcohol, chlorhexidine or an alkaline peroxide (dermacol, aqueous chlorhexidine, steradent) as a major active component. Specimens were fabricated according to manufacturer directions. Surface, roughness were taken on ill specimens at each time interval and then compared statistically using four-way ANOVAs and Tukey HSD (alpha = 0.05). The results of this study indicated that in comparison with distilled water, significant effect on the roughness of the specimens were found after immersion in all of the-denture cleanser solutions at 24 h and at 6 months. Specimens immersed in alkaline peroxide showed higher and significant toughness changes than those immersed in other cleanser solutions. It was also determined that roughness of resilient liner materials increased with time and significantly higher roughness was recorded at 6 months for the auto-cured specimens compared with their heat-cured counterparts. The increasing roughness was greatest in acrylic-based, auto-cured resilient liner in all cleansers especially in alkaline peroxide, which, suggests that the use of this resilient liner may not provide long-term clinical success.en_US
dc.identifier.endpage3096en_US
dc.identifier.issn0970-7077
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-54049154407
dc.identifier.scopusqualityQ4
dc.identifier.startpage3089en_US
dc.identifier.urihttps://hdl.handle.net/11468/20738
dc.identifier.volume20en_US
dc.identifier.wosWOS:000259602400082
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherAsian Journal Of Chemistryen_US
dc.relation.ispartofAsian Journal of Chemistry
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectResilient Denture Linersen_US
dc.subjectRoughnessen_US
dc.subjectDenture Cleanseren_US
dc.subjectCuring Typeen_US
dc.titleEffect of denture cleansers on the roughness of heat-or auto cured denture linersen_US
dc.titleEffect of denture cleansers on the roughness of heat-or auto cured denture liners
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu