Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite

Basit Öğe Kaydı
dc.contributor.authorKiliçkap, E
dc.contributor.authorÇakir, O
dc.contributor.authorAksoy, M
dc.contributor.authorInan, A
dc.date.accessioned2024-04-24T16:15:09Z
dc.date.available2024-04-24T16:15:09Z
dc.date.issued2005
dc.departmentDicle Üniversitesien_US
dc.description8th International Conference on Advances in Materials and Processing Technologies/13th International Conference on Achievements in Mechanical and Materials Engineering -- MAY 16-19, 2005 -- Gliwice Wisla, POLANDen_US
dc.description.abstractMetal matrix composites (MMC) have become a large leading material in composite materials and particle reinforced aluminium MMCs have received considerable attention due to their excellent engineering properties. These materials are known as the difficult-to-machine materials, because of the hardness and abrasive nature of reinforcement element like silicon carbide (SiC) particles. In this study, homogenised 5% SiC-p aluminium MMC material was selected for experimental investigation of tool wear and surface roughness. Two types of K10 cutting tool (uncoated and TiN-coated) were used at different cutting speeds (50, 100 and 150 m/min), feed rates (0.1, 0.2 and 0.3 mm/rev) and depths of cut (0.5, 1 and 1.5 mm). In dry turning condition, tool wear was mainly affected by cutting speed, increased with increasing cutting speed. Tool wear was lower when coated cutting tool was used in comparison to uncoated one. Surface roughness influenced with cutting speed and feed rate. Higher cutting speeds and lower feed rates produced better surface quality. (c) 2005 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.jmatprotec.2005.02.109
dc.identifier.endpage867en_US
dc.identifier.issn0924-0136
dc.identifier.scopus2-s2.0-17844390144
dc.identifier.scopusqualityQ1
dc.identifier.startpage862en_US
dc.identifier.urihttps://doi.org/10.1016/j.jmatprotec.2005.02.109
dc.identifier.urihttps://hdl.handle.net/11468/15674
dc.identifier.volume164en_US
dc.identifier.wosWOS:000229609100010
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofJournal of Materials Processing Technology
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMetal Matrix Compositesen_US
dc.subjectMachiningen_US
dc.subjectTool Wearen_US
dc.subjectSurface Roughnessen_US
dc.titleStudy of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix compositeen_US
dc.titleStudy of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu