Effect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel

Basit Öğe Kaydı
dc.contributor.authorGunen, Ali
dc.contributor.authorKucuk, Yilmaz
dc.contributor.authorEr, Yusuf
dc.contributor.authorCay, V. Veli
dc.contributor.authorOge, Mecit
dc.contributor.authorGok, M. Sabri
dc.date.accessioned2024-04-24T17:20:37Z
dc.date.available2024-04-24T17:20:37Z
dc.date.issued2015
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn this study, the AISI 304 steel specimens were boronized with nanoboron of the size of 10-50 nm and commercial Ekabor 3 powders (<1400 mu m) at 950 degrees C to 1000 degrees C for 2 h and 4 h. Boronized steel specimens were characterized via SEM, microhardness and XRD analyses. Abrasive wear behavior of the specimens, boronized at different temperatures and treatment durations, were examined. The fixed ball micro-abrasion tests were carried out using the abrasive slurry, prepared with different SiC powder particle sizes on the boronized specimens at different rotational speeds. The specimens boronized with nanoboron powders exhibited a higher hardness and abrasive wear resistance than the samples boronized with the Ekabor 3 powders.en_US
dc.identifier.doi10.3139/120.110732
dc.identifier.endpage473en_US
dc.identifier.issn0025-5300
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-84930408386
dc.identifier.scopusqualityQ2
dc.identifier.startpage468en_US
dc.identifier.urihttps://doi.org/10.3139/120.110732
dc.identifier.urihttps://hdl.handle.net/11468/19161
dc.identifier.volume57en_US
dc.identifier.wosWOS:000354791800014
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBoridingen_US
dc.subjectNanoboronen_US
dc.subjectMicroabrasionen_US
dc.subjectHeat Treatmenten_US
dc.subjectAbrasive Wearen_US
dc.titleEffect of the powder particle size on the wear behavior of boronized AISI 304 stainless steelen_US
dc.titleEffect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu