Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC

Basit Öğe Kaydı
dc.contributor.authorOzben, Tamer
dc.contributor.authorKilickap, Erol
dc.contributor.authorCakir, Orhan
dc.date.accessioned2024-04-24T16:15:10Z
dc.date.available2024-04-24T16:15:10Z
dc.date.issued2008
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe paper presents the results of experimental investigation on mechanical and machinability properties of silicon carbide particle (SiC-p) reinforced aluminium metal matrix composite. The influence of reinforced ratios of 5, 10 and 15 wt.% of SiC-p on mechanical properties was examined. The effect of machining parameters, e.g. cutting speed, feed rate and depth of cut on tool wear and surface roughness was studied. It was observed that increase of reinforcement element addition produced better mechanical properties such as impact toughness and hardness, but tensile strength showed different trend; increased upto 10 wt.% of SiC-p reinforced and then decreased when 15 wt.% of SiC-p reinforcement addition. Machinability properties of the selected material were studied and higher SiC-p reinforcement produced a higher tool wear; surface roughness was generally affected by feed rate and cutting speed. (C) 2007 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.jmatprotec.2007.06.082
dc.identifier.endpage225en_US
dc.identifier.issn0924-0136
dc.identifier.issn1097-6787
dc.identifier.issue1-3en_US
dc.identifier.scopus2-s2.0-37349042934
dc.identifier.scopusqualityQ1
dc.identifier.startpage220en_US
dc.identifier.urihttps://doi.org/10.1016/j.jmatprotec.2007.06.082
dc.identifier.urihttps://hdl.handle.net/11468/15679
dc.identifier.volume198en_US
dc.identifier.wosWOS:000252564100032
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofJournal of Materials Processing Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMmcen_US
dc.subjectMechanical Propertiesen_US
dc.subjectMachiningen_US
dc.subjectTool Wearen_US
dc.subjectSurface Roughnessen_US
dc.titleInvestigation of mechanical and machinability properties of SiC particle reinforced Al-MMCen_US
dc.titleInvestigation of mechanical and machinability properties of SiC particle reinforced Al-MMC
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu