Determination of optimum parameters on delamination in drilling of GFRP composites by Taguchi method

Basit Öğe Kaydı
dc.contributor.authorKilickap, Eroi
dc.date.accessioned2024-04-24T17:33:28Z
dc.date.available2024-04-24T17:33:28Z
dc.date.issued2010
dc.departmentDicle Üniversitesien_US
dc.description.abstractDrilling is one of the important machining processes in hole making operations. De lamination is a vital problem during any drilling operation. It causes structural integrity reduction and poor assembly tolerance as well as potential for long-term performance deterioration. As a result, drilling of any material requires dimensional stability and interface quality. In this study, glass fibre reinforced plastic composite is selected as experimental material for investigation of cutting parameters (cutting speed, feed rate and tool geometry) affecting delamination in drilling operation. Moreover, the Taguchi method is used to determine optimal cutting parameters for damage-free drilling material. A plan of experiments, based on L'16 Taguchi design method, is performed drilling with cutting parameters in a GFRP composite. The orthogonal array, signal-to-noise (S/N) ratio and analysis of variance (ANOVA) are employed to investigate the optimal drilling parameters of GFRP composites using four different drills. The experimental results demonstrate that the feed rate is the major parameter among the controllable factors that influence the delamination. Additionally, the optimal combinations of the cutting parameters are determined.en_US
dc.identifier.endpage274en_US
dc.identifier.issn0971-4588
dc.identifier.issn0975-1017
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-78149487520
dc.identifier.scopusqualityQ3
dc.identifier.startpage265en_US
dc.identifier.urihttps://hdl.handle.net/11468/20700
dc.identifier.volume17en_US
dc.identifier.wosWOS:000281701800004
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherNatl Inst Science Communication-Niscairen_US
dc.relation.ispartofIndian Journal of Engineering and Materials Sciences
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTaguchi Methoden_US
dc.subjectAnalysis Of Varianceen_US
dc.subjectDesign Optimizationen_US
dc.subjectDrillingen_US
dc.subjectDe Laminationen_US
dc.subjectGlass Fibre Reinforced Plastic Compositesen_US
dc.titleDetermination of optimum parameters on delamination in drilling of GFRP composites by Taguchi methoden_US
dc.titleDetermination of optimum parameters on delamination in drilling of GFRP composites by Taguchi method
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu