Seawater effect on pin-loaded laminated composites with two parallel holes

Basit Öğe Kaydı
dc.contributor.authorOrcen, Gurbet
dc.contributor.authorGur, Mustafa
dc.contributor.authorOzen, Mustafa
dc.date.accessioned2024-04-24T16:02:45Z
dc.date.available2024-04-24T16:02:45Z
dc.date.issued2012
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe aim of this study was to investigate the effects of seawater on the failure mode, first failure load and bearing strength behaviour of the pinned joint of fibreglass-reinforced woven epoxy composite prepregs. The specimens were kept in seawater for 3- and 6-month periods. After each period, their mechanical properties were examined. The edge distance-to-upper hole diameter (E/D), the two hole-tohole centre diameter (K/D), the distance from the upper or the lower edge of the specimen to the centre of the hole-to-hole diameter (M/D), and the width of the specimen-to-hole diameter (W/D) ratios were selected as parameters. Moreover, the finite element models of the specimens were developed using ANSYS software, and the Tsai-Wu criterion was used to obtain the first failure load. The numerical and experimental results were compared and were found to be in good agreement for the first failure load.en_US
dc.description.sponsorshipDivision Firat University Scientific Research Projects (FUBAP), Firat University, Elazig-TURKEYen_US
dc.description.sponsorshipFinancial support for this study was provided by the Division Firat University Scientific Research Projects (FUBAP), Firat University, Elazig-TURKEY. The authors wish to express their sincere thanks to Prof. Onur Sayman (Dokuz Eylul University, Izmir).en_US
dc.identifier.doi10.1007/s12206-012-0909-2
dc.identifier.endpage4063en_US
dc.identifier.issn1738-494X
dc.identifier.issue12en_US
dc.identifier.scopus2-s2.0-84876954925
dc.identifier.scopusqualityQ2
dc.identifier.startpage4055en_US
dc.identifier.urihttps://doi.org/10.1007/s12206-012-0909-2
dc.identifier.urihttps://hdl.handle.net/11468/14904
dc.identifier.volume26en_US
dc.identifier.wosWOS:000313519700036
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherKorean Soc Mechanical Engineersen_US
dc.relation.ispartofJournal of Mechanical Science and Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPrepregen_US
dc.subjectEnvironmental Degradationen_US
dc.subjectFinite Element Analysisen_US
dc.subjectMechanical Testingen_US
dc.titleSeawater effect on pin-loaded laminated composites with two parallel holesen_US
dc.titleSeawater effect on pin-loaded laminated composites with two parallel holes
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu