Effects of Cutting Parameters and Point Angle on Thrust Force and Delamination in Drilling of CFRP

Basit Öğe Kaydı
dc.contributor.authorYardimeden, Ahmet
dc.contributor.authorKilickap, Erol
dc.contributor.authorCelik, Yahya Hisman
dc.date.accessioned2024-04-24T17:20:37Z
dc.date.available2024-04-24T17:20:37Z
dc.date.issued2014
dc.departmentDicle Üniversitesien_US
dc.description.abstractParts made of composite materials are generally produced by near-net-shape technology. However, additional machining operations such as drilling are often required to facilitate components assembling. Drilling of composite materials is also a common process in the assembly of aerospace and automotive composite structures. During drilling, unlike the conventional materials, a few damage forms may take place. Among these damage forms, the delamination is the most important one. Therefore, the experimental studies carried out on drilling of CFRP composite materials for determining optimum processing parameters are of great importance. In this particular study, delamination in CFRP composites caused by drilling was investigated. The composite material was drilled under various spindle speeds, feed rates and drill point angles. The results showed that delamination and thrust forces were affected by cutting parameters. It was demonstrated that feed rate and drill point angle make the largest contribution to the overall performance.en_US
dc.identifier.doi10.3139/120.110666
dc.identifier.endpage1048en_US
dc.identifier.issn0025-5300
dc.identifier.issue11-12en_US
dc.identifier.scopus2-s2.0-84918837225
dc.identifier.scopusqualityQ2
dc.identifier.startpage1042en_US
dc.identifier.urihttps://doi.org/10.3139/120.110666
dc.identifier.urihttps://hdl.handle.net/11468/19160
dc.identifier.volume56en_US
dc.identifier.wosWOS:000345131900019
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMaterials Testingen_US
dc.subjectDrillingen_US
dc.subjectDelaminationen_US
dc.subjectCfrpen_US
dc.subjectThrust Forceen_US
dc.titleEffects of Cutting Parameters and Point Angle on Thrust Force and Delamination in Drilling of CFRPen_US
dc.titleEffects of Cutting Parameters and Point Angle on Thrust Force and Delamination in Drilling of CFRP
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu