Empirical Study Regarding the Effects of Minimum Quantity Lubricant Utilization on Performance Characteristics in the Drilling of Al 7075

Basit Öğe Kaydı
dc.contributor.authorKilickap, Erol
dc.contributor.authorHuseyinoglu, Mesut
dc.contributor.authorOzel, Cihan
dc.date.accessioned2024-04-24T17:18:11Z
dc.date.available2024-04-24T17:18:11Z
dc.date.issued2011
dc.departmentDicle Üniversitesien_US
dc.description.abstractCutting fluids are difficult and expensive to recycle. These drawbacks mentioned can be reduced or eliminated by performing the cutting operations with minimum quantity lubrication or without using any cutting fluid. In this study, the effects of different cutting parameters on performance characteristics are studied empirically during the drilling of Al7075. The work piece surface roughness and the temperature changes due to the incurred heat at the cutting process are taken as performance outputs. In the experiments, HSS tools with a diameter of 8 mm and an angle of 118o were used. Minimum quantity lubrication (MQL), compressed air and dry processing (without the usage of any cooling liquid) techniques are used as the applied cooling technique. In the processing technique with MQL, the cooling liquid is sent pulverized on the interface between the work piece and the tool. Boron oil-water emulsion is used as the cutting liquid. As a result of the experiments, it is determined that better results are achieved with the MQL technique than with other cooling techniques. The best surface roughness is achieved at 20 m/min cutting speed and 0.1 mm/rev feed rate.en_US
dc.identifier.doi10.1590/S1678-58782011000100008
dc.identifier.endpage57en_US
dc.identifier.issn1678-5878
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-79955865348
dc.identifier.scopusqualityQ2
dc.identifier.startpage52en_US
dc.identifier.urihttps://doi.org/10.1590/S1678-58782011000100008
dc.identifier.urihttps://hdl.handle.net/11468/18652
dc.identifier.volume33en_US
dc.identifier.wosWOS:000290390200008
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherAbcm Brazilian Soc Mechanical Sciences & Engineeringen_US
dc.relation.ispartofJournal of The Brazilian Society of Mechanical Sciences and Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMqlen_US
dc.subjectAluminium Compositeen_US
dc.subjectDrillingen_US
dc.subjectSurface Roughnessen_US
dc.titleEmpirical Study Regarding the Effects of Minimum Quantity Lubricant Utilization on Performance Characteristics in the Drilling of Al 7075en_US
dc.titleEmpirical Study Regarding the Effects of Minimum Quantity Lubricant Utilization on Performance Characteristics in the Drilling of Al 7075
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu