Investigation of experimental study of end milling of CFRP composite

Basit Öğe Kaydı
dc.contributor.authorKilickap, Erol
dc.contributor.authorYardimeden, Ahmet
dc.contributor.authorCelik, Yahya Hisman
dc.date.accessioned2024-04-24T17:18:01Z
dc.date.available2024-04-24T17:18:01Z
dc.date.issued2015
dc.departmentDicle Üniversitesien_US
dc.description.abstractCarbon fiber-reinforced plastic (CFRP) composites are materials that are difficult to machine due to the anisotropic and heterogeneous properties of the material and poor surface quality, which can be seen during the machining process. The machining of these materials causes delamination and surface roughness owing to excessive cutting forces. This causes the material not to be used. The reduction of damage and surface roughness is an important aspect for product quality. Therefore, the experimental study carried out on milling of CFRP composite material is of great importance. End milling tests were performed at CNC milling vertical machining center. In the experiments, parameters considered for the end milling of CFRP were cutting speed, feed rate, and flute number of end mill. The results showed that damage, surface roughness, and cutting forces were affected by cutting parameters and flute number of end mill. The best machining conditions were achieved at low feed rate and four-flute end mill.en_US
dc.identifier.doi10.1515/secm-2013-0143
dc.identifier.endpage95en_US
dc.identifier.issn0792-1233
dc.identifier.issn2191-0359
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84921800665
dc.identifier.scopusqualityQ3
dc.identifier.startpage89en_US
dc.identifier.urihttps://doi.org/10.1515/secm-2013-0143
dc.identifier.urihttps://hdl.handle.net/11468/18545
dc.identifier.volume22en_US
dc.identifier.wosWOS:000348297300010
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofScience and Engineering of Composite Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCfrpen_US
dc.subjectCutting Forceen_US
dc.subjectDelaminationen_US
dc.subjectEnd Millingen_US
dc.subjectSurface Roughnessen_US
dc.titleInvestigation of experimental study of end milling of CFRP compositeen_US
dc.titleInvestigation of experimental study of end milling of CFRP composite
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu