Analyzing the impacts of cutting parameters on cutting forces in the taguchi method for boring high-alloy white cast irons with CBN inserts

Basit Öğe Kaydı
dc.authorid0000-0001-5808-3425en_US
dc.authorid0000-0001-6793-7103en_US
dc.contributor.authorErkoçak, Yasin
dc.contributor.authorKayır, Yunus
dc.date.accessioned2023-08-17T11:28:18Z
dc.date.available2023-08-17T11:28:18Z
dc.date.issued2023en_US
dc.departmentDicle Üniversitesi, Sivil Havacılık Yüksek Okulu, Uçak Gövde Motor Bakım Bölümüen_US
dc.description.abstractIn this study, the machinability of test pieces obtained from two different white cast irons, NiHARD-4 and HCWCI, were investigated by boring method, a machining process. The impacts of cutting parameters on cutting forces were identified. Analysis of variance was used to determine the effect ratios of the cutting parameters. Moreover, Taguchi analyses were used in the experiments to examine the impacts of cutting parameters on cutting forces. Considering the results in terms of dry and wet test conditions, it has been revealed that the cutting forces such as Fc, Fr and Ff of HCWCI material are lower than NiHARD-4 material in all test conditions. In dry cutting, high cutting speed and low feed have decreased the cutting forces. In wet cutting when the cutting speed has increased, Fr and Ff have increased. In terms of the cutting parameters, it was found that the most impact parameter on Fc is feed rate, the most impact parameter on Fr is material and the most impact parameter on Ff is cutting speed in dry cutting. In wet cutting, the most effective factor on Fc is feed rate, whereas the most effective factor on Fr and Ff is the material. Consequently, it can be said that to lower the cutting forces is required to reduce the feed rate and raise the cutting speed when NiHARD-4 and HCWCI materials are machined by boring operations with CBN inserts.en_US
dc.identifier.citationErkoçak, Y. ve Kayır, Y. (2023). Analyzing the impacts of cutting parameters on cutting forces in the taguchi method for boring high-alloy white cast irons with CBN inserts. Arabian Journal for Science and Engineering, 1-17.en_US
dc.identifier.doi10.1007/s13369-023-08008-z
dc.identifier.endpage17en_US
dc.identifier.issn2193-567X
dc.identifier.scopus2-s2.0-85163778431
dc.identifier.scopusqualityQ1
dc.identifier.startpage1en_US
dc.identifier.urihttps://link.springer.com/article/10.1007/s13369-023-08008-z
dc.identifier.urihttps://hdl.handle.net/11468/12497
dc.identifier.wosWOS:001020428000001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorErkoçak, Yasin
dc.language.isoenen_US
dc.publisherInstitute for Ionicsen_US
dc.relation.ispartofArabian Journal for Science and Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBoringen_US
dc.subjectForcesen_US
dc.subjectNiHARD-4en_US
dc.subjectHCWICIen_US
dc.subjectTaguchien_US
dc.subjectANOVAen_US
dc.titleAnalyzing the impacts of cutting parameters on cutting forces in the taguchi method for boring high-alloy white cast irons with CBN insertsen_US
dc.titleAnalyzing the impacts of cutting parameters on cutting forces in the taguchi method for boring high-alloy white cast irons with CBN inserts
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Analyzing the Impacts of Cutting Parameters on Cutting Forces in the Taguchi Method for Boring High-Alloy White Cast Irons with CBN Inserts.pdf
Boyut:
2.07 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Sivil Havacılık Yüksekokulu Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu