Analysis of critical buckling load of laminated composites plate with different boundary conditions using FEM and analytical methods

Basit Öğe Kaydı
dc.contributor.authorOzben, Tamer
dc.date.accessioned2024-04-24T16:11:07Z
dc.date.available2024-04-24T16:11:07Z
dc.date.issued2009
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn this study, the critical buckling load of fiber reinforced composite plate was calculated by analytical and finite element methods. The critical buckling loads and composite deformations were obtained on the basis of plate dimensions ratio (LxLy). The deformation behaviour of the plate is shown for modes i = 1,2 and different values of orientation angles [0/0](2). As a result of the analysis, for the composite plates with symmetric and antisymmetric layup the critical buckling loads were obtained for different support conditions. It was observed that difference between results increased depending on 0 angle, although critical buckling load values obtained by using numerical and finite element methods were nearly same in [0/0](2) orientation angles. (C) 2009 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.commatsci.2009.01.003
dc.identifier.endpage1015en_US
dc.identifier.issn0927-0256
dc.identifier.issn1879-0801
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-67349213680
dc.identifier.scopusqualityQ1
dc.identifier.startpage1006en_US
dc.identifier.urihttps://doi.org/10.1016/j.commatsci.2009.01.003
dc.identifier.urihttps://hdl.handle.net/11468/15273
dc.identifier.volume45en_US
dc.identifier.wosWOS:000267183200023
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.relation.ispartofComputational Materials Science
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPolymer-Matrix Compositesen_US
dc.subjectLaminated Plateen_US
dc.subjectBucklingen_US
dc.subjectFemen_US
dc.subjectModelingen_US
dc.titleAnalysis of critical buckling load of laminated composites plate with different boundary conditions using FEM and analytical methodsen_US
dc.titleAnalysis of critical buckling load of laminated composites plate with different boundary conditions using FEM and analytical methods
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu