STRESS INTENSITY ANLAYSIS OF BIAXIAL STRESSED SINGLE ELLIPTICAL HOLE IN PLATE ACCORDING TO CHANGE OF HOLE INCLINATION AND GEOMETRY

Basit Öğe Kaydı
dc.contributor.authorOzben, Tamer T.
dc.contributor.authorArslan, Nurettin
dc.contributor.authorOzbay, Mahmut
dc.date.accessioned2024-04-24T17:49:47Z
dc.date.available2024-04-24T17:49:47Z
dc.date.issued2011
dc.departmentDicle Üniversitesien_US
dc.description.abstractDiscontinuities such as the holes in a finite plate under loading while the more stress concentrations around holes causes. Applied to the edges of plate and the different rates the principal stresses (sigma(1)/sigma(2)) around the hole were caused by the stress components (x, y) changes investigated. For biaxial stress in the plate, according to the different stress rate variation of stress intensity was obtained around the hole According to long edge (2b) and short edge (2a) of ellipse hole length the distribution of stress field occurring in the plate surfaces were are showed. Moreover, according to the plate width (H) the maximum stress value was calculated using the finite element method for different stress rates and large edge length of an ellipse. The inclination (theta=0(0), 15(0), 30(0), 45(0) and 90(0)) of ellipse hole with different geometries, according to the plate axis the maximum stress values and the stress field distribution the finite element and analytic method are obtained, and results were compared.en_US
dc.identifier.endpage531en_US
dc.identifier.issn1300-1884
dc.identifier.issn1304-4915
dc.identifier.issue3en_US
dc.identifier.startpage523en_US
dc.identifier.urihttps://hdl.handle.net/11468/22945
dc.identifier.volume26en_US
dc.identifier.wosWOS:000295217600004
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.language.isotren_US
dc.publisherGazi Univ, Fac Engineering Architectureen_US
dc.relation.ispartofJournal of The Faculty of Engineering and Architecture of Gazi University
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectStress Intensityen_US
dc.subjectEllipse Hole Inclinationen_US
dc.subjectFinite Element Methoden_US
dc.titleSTRESS INTENSITY ANLAYSIS OF BIAXIAL STRESSED SINGLE ELLIPTICAL HOLE IN PLATE ACCORDING TO CHANGE OF HOLE INCLINATION AND GEOMETRYen_US
dc.titleSTRESS INTENSITY ANLAYSIS OF BIAXIAL STRESSED SINGLE ELLIPTICAL HOLE IN PLATE ACCORDING TO CHANGE OF HOLE INCLINATION AND GEOMETRY
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu