An experimental study on milling of natural fiber (jute)- reinforced polymer composites

Basit Öğe Kaydı
dc.contributor.authorCelik, Yahya H.
dc.contributor.authorKilickap, Erol
dc.contributor.authorKilickap, Ali Imran
dc.date.accessioned2024-04-24T17:14:33Z
dc.date.available2024-04-24T17:14:33Z
dc.date.issued2019
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe interest in materials having natural, environmentally friendly, renewable and low density/cost is increasing day by day due to sanctions imposed to reduce the emission rates, especially the Kyoto Protocol. In recent years, the use of environmentally friendly composites by using natural fibers such as flax, jute and sisal has increased in engineering applications. Milling operation has frequently been an important method of machining which can achieve the desired dimensions and tolerances for the plate-shaped parts. In this study, the effects of cutting parameters such as cutting speed and feed rate on cutting force, delamination factor and surface roughness in end milling of jute fiber-reinforced polymer composite plates with different orientation angle (0 degrees/90 degrees, 30 degrees/-60 degrees and +/- 45 degrees) were examined by using the cemented carbide (WC) end mills (two, three and four number of flutes). Cutting force, deformation factor and surface roughness were found to be influenced by the feed rate and cutting speeds. In addition, increasing the number of the flutes of the cutting tools reduced the cutting force, delamination factor and surface roughness.en_US
dc.identifier.doi10.1177/0021998319826373
dc.identifier.endpage3137en_US
dc.identifier.issn0021-9983
dc.identifier.issn1530-793X
dc.identifier.issue22en_US
dc.identifier.scopus2-s2.0-85061187244
dc.identifier.scopusqualityQ1
dc.identifier.startpage3127en_US
dc.identifier.urihttps://doi.org/10.1177/0021998319826373
dc.identifier.urihttps://hdl.handle.net/11468/18045
dc.identifier.volume53en_US
dc.identifier.wosWOS:000480254600006
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofJournal of Composite Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCompositesen_US
dc.subjectCutting Forceen_US
dc.subjectDelaminationen_US
dc.subjectEnd Millingen_US
dc.subjectJuteen_US
dc.subjectSurface Roughnessen_US
dc.titleAn experimental study on milling of natural fiber (jute)- reinforced polymer compositesen_US
dc.titleAn experimental study on milling of natural fiber (jute)- reinforced polymer composites
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu