Effect of cutting environment and heat treatment on the surface roughness of drilled Al/SiC MMC

Basit Öğe Kaydı
dc.contributor.authorKilickap, Erol
dc.date.accessioned2024-04-24T17:20:37Z
dc.date.available2024-04-24T17:20:37Z
dc.date.issued2016
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn the last decades, the use of metal matrix composites (MMCs) has increased enormously in many engineering applications such as aerospace, automotive, marine and railway. Such materials are known as difficult to machine materials due to the presence of very hard and abrasive reinforcements. The purpose of this study is to determine the influence of the cutting parameters, cutting environment and heat treatments on the surface roughness after drilling A 356/15 SiC MMCs. Experiments were conducted at different cutting speeds, feed rates, heat treatments (as-received, solution annealed and aged) and cutting environments (MQL, compressed air and dry). Improved surface roughness values were obtained with increased cutting speeds and decreased feed rates. The surface roughness using the MQL technique was lower than the surface roughness obtained for the other cutting environment. The optimal machining parameter combination has been obtained and the cutting conditions in terms of the cutting speed of 15 m x min(-1), the feed rate of 0.1 mm x rev(-1) and the cutting environment MQL represent applicable solutions for the annealed materials.en_US
dc.identifier.doi10.3139/120.110857
dc.identifier.endpage361en_US
dc.identifier.issn0025-5300
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-84992386954
dc.identifier.scopusqualityQ2
dc.identifier.startpage357en_US
dc.identifier.urihttps://doi.org/10.3139/120.110857
dc.identifier.urihttps://hdl.handle.net/11468/19162
dc.identifier.volume58en_US
dc.identifier.wosWOS:000373529200011
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMetal Matrix Compositesen_US
dc.subjectDrillingen_US
dc.subjectHeat Treatmenten_US
dc.subjectCutting Environmenten_US
dc.subjectSurface Roughnessen_US
dc.titleEffect of cutting environment and heat treatment on the surface roughness of drilled Al/SiC MMCen_US
dc.titleEffect of cutting environment and heat treatment on the surface roughness of drilled Al/SiC MMC
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu