Separation of liquid fractions obtained from flash pyrolysis of asphaltite

dc.contributor.authorSaydut, Abdurrahman
dc.contributor.authorDuz, M. Zahir
dc.contributor.authorTonbul, Yalcin
dc.contributor.authorBaysal, Akin
dc.contributor.authorHamamci, Candan
dc.date.accessioned2024-04-24T16:14:58Z
dc.date.available2024-04-24T16:14:58Z
dc.date.issued2008
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe experiments on the flash pyrolysis of asphaltite (Avgamasya, Sirnak, SE Anatolia, Turkey) were carried out in a fixed bed reactor as a basic study. The investigation focused on the effects of pyrolysis temperature and asphaltite particle size on the product distribution and composition. Sample particle size sieve analysis of asphaltite was performed. Liquefaction of asphaltite, different particle size, and using flash pyrolysis was performed in a fixed bed reactor with a heating rate 40 degrees C min(-1) at a temperature ranging from 400 to 800 degrees C under nitrogen atmosphere. The effect of particle size and temperature on conversion and liquid yield was examined. The yield of asphaltite liquid at the condition of -0.60 + 0.25 mm and 550 degrees C at reached a maximum 11.13 wt%. An optimum temperature for the liquid yield was found to be 550 degrees C. The oil product was distilled by fractionally distillation to separate component. The pyrolysis studies provide important quantitative information on the identity, composition and structure of asphaltites. Oil was treated silica gel column chromatography. Using n-hexane, toluene and methanol, the oil was separated into aliphatic, aromatic and polar components, respectively. For further structural analysis, the pyrolysis oils aliphatic, aromatic and polar subfractions were conducted using FTIR. The results of this study provide fundamental data and optimal conditions to maximize light oils yields. (c) 2007 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.jaap.2007.09.003
dc.identifier.endpage99en_US
dc.identifier.issn0165-2370
dc.identifier.issn1873-250X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-36849047198
dc.identifier.scopusqualityQ1
dc.identifier.startpage95en_US
dc.identifier.urihttps://doi.org/10.1016/j.jaap.2007.09.003
dc.identifier.urihttps://hdl.handle.net/11468/15552
dc.identifier.volume81en_US
dc.identifier.wosWOS:000252485300015
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.relation.ispartofJournal of Analytical and Applied Pyrolysis
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAsphaltiteen_US
dc.subjectFlash Pyrolysisen_US
dc.subjectColumn Chromatographyen_US
dc.subjectFtiren_US
dc.subjectParticle Sizeen_US
dc.subjectTemperatureen_US
dc.titleSeparation of liquid fractions obtained from flash pyrolysis of asphaltiteen_US
dc.titleSeparation of liquid fractions obtained from flash pyrolysis of asphaltite
dc.typeArticleen_US

Dosyalar