AN INTRODUCTION TO RADIOGRAPHY EXAMINATION METHOD IN THE INSTRUCTION ON WELDING

Basit Öğe Kaydı
dc.contributor.authorKejanli, Haluk
dc.contributor.authorGur, Ali Kaya
dc.contributor.authorTurkmen, Mustafa
dc.contributor.authorCaligulu, Ugur
dc.date.accessioned2024-04-24T17:47:49Z
dc.date.available2024-04-24T17:47:49Z
dc.date.issued2020
dc.departmentDicle Üniversitesien_US
dc.description.abstractThe radiography examination method is used to detect defects both inside and on the surface in the weld seams in metals and alloys. We describe the radiography examination method for instructional purposes. We provide an example of radiographic testing of AISI 1010 steel + copper materials welded by friction welding in a direct-drive type friction-welding machine. The subsequent radiographic testing shows that such a pair can be welded with adequate strength via the friction welding technique. The amount of flash increases in all specimens with increasing rotational speed, friction pressure, and forging pressure. On the other hand, as friction time increased, the amount of flash decreases.en_US
dc.identifier.endpage156en_US
dc.identifier.issn0738-7989
dc.identifier.issue3-4en_US
dc.identifier.startpage145en_US
dc.identifier.urihttps://hdl.handle.net/11468/22764
dc.identifier.volume42en_US
dc.identifier.wosWOS:000637873700002
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.language.isoenen_US
dc.publisherInt Council Materials Educationen_US
dc.relation.ispartofJournal of Materials Education
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSteel Plus Copperen_US
dc.subjectFriction Weldingen_US
dc.subjectRadiographic Testingen_US
dc.titleAN INTRODUCTION TO RADIOGRAPHY EXAMINATION METHOD IN THE INSTRUCTION ON WELDINGen_US
dc.titleAN INTRODUCTION TO RADIOGRAPHY EXAMINATION METHOD IN THE INSTRUCTION ON WELDING
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu