Effect of Fiber Orientation Angle on the Failure Mode of Pin Jointed Laminated Composite Plates

Basit Öğe Kaydı
dc.contributor.authorTuran, Kadir
dc.contributor.authorKaman, Mete Onur
dc.contributor.authorGur, Mustafa
dc.date.accessioned2024-04-24T17:47:25Z
dc.date.available2024-04-24T17:47:25Z
dc.date.issued2010
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn this study, the major aim is to investigate change effects of fiber orientation angles on the failure loads and failure modes for the pin jointed laminated composite plates. In the analysis, laminated composite plates with epoxy matrix resin reinforced unidirectional carbon fibers are used. The ply arrangements are chosen [theta degrees](4) and theta; fiber reinforced angle changes from 0 degrees to 90 degrees with 15 degrees increments. The failure load and failure mode are analyzed experimentally and numerically. In the numerical analysis Ansys program is used. In the program, material properties are degraded using APDL code which is written for progressive failure analysis and contains Hashin failure criteria for laminated composite plates. In the experimental study, the maximum failure load for [15 degrees](4) laminae cofiguration, 749.917 N and minimum failure load for [60 degrees](4), 467.483 N laminae configuration are obtained. A good agreement between experimental and numerical solution is obtained.en_US
dc.identifier.endpage220en_US
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue2en_US
dc.identifier.startpage213en_US
dc.identifier.urihttps://hdl.handle.net/11468/22450
dc.identifier.volume16en_US
dc.identifier.wosWOS:000443139300010
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.language.isotren_US
dc.publisherPamukkale Univen_US
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectLaminated Composite Materialsen_US
dc.subjectProgressive Failure Analysisen_US
dc.subjectPin Jointsen_US
dc.subjectFinite Element Methoden_US
dc.titleEffect of Fiber Orientation Angle on the Failure Mode of Pin Jointed Laminated Composite Platesen_US
dc.titleEffect of Fiber Orientation Angle on the Failure Mode of Pin Jointed Laminated Composite Plates
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu