Effect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced composites

Basit Öğe Kaydı
dc.contributor.authorDemir, Mehmet Emin
dc.contributor.authorCelik, Yahya Hisman
dc.contributor.authorKilickap, Erol
dc.date.accessioned2024-04-24T17:20:37Z
dc.date.available2024-04-24T17:20:37Z
dc.date.issued2019
dc.departmentDicle Üniversitesien_US
dc.description.abstractEnvironmental friendly natural fibers have been used instead of petroleum-based synthetic fibers as reinforcements because of the depletion of oil resources, plastic waste disposal problems and the emissions generated during combustion. In these natural fibers, thermoplastic or thermoset materials are used as matrix material because of their low cost, light weight and durability. In this study, the effects of ply number (2 and 3 layer) and orientation angle of reinforcement (0/90 degrees and +/- 45 degrees) and matrix type (thermoset and thermoplastic) on the tensile strength of jute reinforced composites were investigated. Also, the effect of the reinforcement orientation angle, sliding time (600, 1200 and 1800 s) and applied load (5, 10 and 15 N) on tribological characteristics were determined. Adhesive and abrasion wear tests were carried out at 0.15 m x s(-1) sliding speed. It was observed that the matrix material and the reinforcement are very important in tensile and wear tests, while the ply number and the orientation angle only exert an influence in the tensile strength of composites. It was determined that an increase in load and sliding time is the most effective parameter on wear experiments.en_US
dc.identifier.doi10.3139/120.111388
dc.identifier.endpage812en_US
dc.identifier.issn0025-5300
dc.identifier.issue8en_US
dc.identifier.startpage806en_US
dc.identifier.urihttps://doi.org/10.3139/120.111388
dc.identifier.urihttps://hdl.handle.net/11468/19166
dc.identifier.volume61en_US
dc.identifier.wosWOS:000478759900014
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAbrasive Wearen_US
dc.subjectAdhesive Wearen_US
dc.subjectTensile Strengthen_US
dc.subjectJuteen_US
dc.subjectCompositeen_US
dc.titleEffect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced compositesen_US
dc.titleEffect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced composites
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu