Effect of abrasive particle sizes on abrasive wear of ceramic coatings sprayed by plasma process

Basit Öğe Kaydı
dc.contributor.authorGök, Mustafa Sabri
dc.contributor.authorGençel, Osman Serden
dc.contributor.authorKoç, Vahdettin
dc.contributor.authorKuchuk, Y.
dc.contributor.authorÇay, Vedat Veli
dc.contributor.orcid0000-0002-2770-4038
dc.date.accessioned2024-04-24T17:56:05Z
dc.date.available2024-04-24T17:56:05Z
dc.date.issued2011
dc.departmentDicle Üniversitesi, Sivil Havacılık Yüksekokulu, Uçak Bakım ve Onarım Bölümüen_US
dc.description.abstractThis study examines the effects of abrasive grain size on abrasive wear behaviors on surfaces coated with different types of ceramics. To this end, the surface of AISI 1040 steel is coated with the ceramic materials of 5% SiO 2-3% TiO 2-92% Cr 2O 3, 60% Al 2O 3-40% TiO 2, pure Al 2O 3 and 87% Al 2O 3-13% TiO 2 using the plasma method. Following the coating process, the abrasive wear resistance of each sample is tested by the ring-on-disc method. 80-220 mesh SiC abrasive paper is used as abrasive. The best wear resistance is obtained with the ceramic coating containing 92% Cr 2O 3, which is followed by pure Al 2O 3 and 87% Al 2O 3-13% TiO 2, respectively. The lowest wear resistance is observed in 60% Al 2O 3-40% TiO 2 ceramic coating. Wear resistance of the samples increases with increasing hardness value and decreasing abrasive grain size. It is observed that wear mechanisms occurring on the samples' wear surfaces change with changing abrasive grain size. Wear mechanisms such as microscratching, microcracking, and plastic deformation are observed in the samples.en_US
dc.identifier.citationGök, M. S., Gençel, O. S., Koç, V., Kuchuk, Y. ve Çay, V. V. (2011). Effect of abrasive particle sizes on abrasive wear of ceramic coatings sprayed by plasma process. Powder Metallurgy and Metal Ceramics, 50(5-6), 322-330.
dc.identifier.doi10.1007/s11106-011-9335-8
dc.identifier.endpage330en_US
dc.identifier.issn1068-1302
dc.identifier.issue5-6en_US
dc.identifier.scopus2-s2.0-80155157585
dc.identifier.scopusqualityQ2
dc.identifier.startpage322en_US
dc.identifier.urihttps://doi.org/10.1007/s11106-011-9335-8
dc.identifier.urihttps://hdl.handle.net/11468/23268
dc.identifier.urihttps://link.springer.com/article/10.1007/s11106-011-9335-8
dc.identifier.volume50en_US
dc.indekslendigikaynakScopus
dc.institutionauthorÇay, Vedat Veli
dc.language.isoenen_US
dc.relation.ispartofPowder Metallurgy and Metal Ceramics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAbrasive wearen_US
dc.subjectCeramicsen_US
dc.subjectCoatingen_US
dc.subjectPlasma sprayen_US
dc.titleEffect of abrasive particle sizes on abrasive wear of ceramic coatings sprayed by plasma processen_US
dc.titleEffect of abrasive particle sizes on abrasive wear of ceramic coatings sprayed by plasma process
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Effect of abrasive particle sizes on abrasive wear of ceramic coatings sprayed by plasma process.pdf
Boyut:
1010.12 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu