Farklı molaritede Pb(No3)2 çözeltisi kullanılarak kimyasal banyo depolaması yöntemi ile elde edilen Pbs filmlerin bazı fiziksel özellikleri
dc.authorid | 204253 | en_US |
dc.authorid | 103636 | en_US |
dc.contributor.author | Yıldırım, Ayça Kıyak | |
dc.contributor.author | Altıokka, Barış | |
dc.date.accessioned | 2019-12-11T12:49:28Z | |
dc.date.available | 2019-12-11T12:49:28Z | |
dc.date.issued | 2018 | |
dc.department | Bilecik Şeyh Edebali Üniversitesi, Meslek Yüksekokulu | en_US |
dc.description.abstract | Kimyasal banyo depozisyon metot kullanılarak üretilen nanokristal PbS ince filmler incelenmiştir. Tüm deneylerde, Pb(NO3)2 ve CS(NH2)2 çözeltisi kullanılmıştır. Depozisyon sıcaklığı depozisyon boyunca 200C’de tutulmuştur. Depozisyon çözeltisinin pH değeri 11,5 olarak ayarlanmıştır. Nanokristal PbS ince filmlerin karakterizasyonu X-ışını kırınımı (XRD) ve taramalı elektron mikroskobu (SEM) yöntemleri kullanılarak gerçekleştirilmiştir. XRD sonuçlarına göre, tüm filmlerin kübik PbS yapısında olduğu anlaşılmıştır. Pb(NO3)2 konsantrasyonunun molarite değeri arttıkça filmlerin kalınlığının arttığı gözlenmiştir. Pb(NO3)2 molaritesi 0,011 M olarak üretilen ince filmin , üretilen diğer ince filmlere göre daha yüksek XRD pik şiddetine sahip olduğu gözlenmiştir. Fakat SEM görüntüleri incelendiğinde Pb(NO3)2 molaritesi 0,009 M olarak üretilen ince filmin daha az pinhole sahip olduğu gözlenmiştir. | en_US |
dc.description.abstract | Nanocrystalline PbS thin films produced using the chemical bath deposition method have been investigated. In all experiments, Pb(NO3)2 solution and CS(NH2)2 solution were used and the deposition temperature was maintained at 200C throughout the deposition. The pH value of the deposition solution is set to 11,5. Characterization of nanocrystalline PbS thin films was performed using X-ray diffraction (XRD) and scanning electron microscopy (SEM) methods. XRD results show that all films are in the cubic PbS structure. As the molarity value of the Pb(NO3)2 concentration increases, the thickness of the films increases. It has been observed that the thin filmin produced as Pb(NO3)2 molarity 0,011 M has a higher XRD peak intensity than the other thin films produced. However, when SEM images are examined, it is observed that the thin filmin produced as 0,009 M of Pb (NO3)2 molarity has less pinhole | en_US |
dc.identifier.citation | Yıldırım, A.K., Altıokka, B. (2018). Farklı molaritede Pb(No3)2 çözeltisi kullanılarak kimyasal banyo depolaması yöntemi ile elde edilen Pbs filmlerin bazı fiziksel özellikleri. Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 7 (1), 42-49 | en_US |
dc.identifier.endpage | 49 | en_US |
dc.identifier.issn | 2146-4693 | |
dc.identifier.issn | 2458-9330 | |
dc.identifier.issue | 1 | en_US |
dc.identifier.startpage | 42 | en_US |
dc.identifier.uri | https://hdl.handle.net/11468/46 | |
dc.identifier.uri | http://fbedergi.dicle.edu.tr/upload/sayi/16/DUFED-00147.pdf | |
dc.identifier.volume | 7 | en_US |
dc.institutionauthor | 0-Belirlenecek | |
dc.language.iso | tr | en_US |
dc.publisher | Dicle Üniversitesi Fen Bilimleri Enstitüsü | en_US |
dc.relation.ispartof | Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi | en_US |
dc.relation.publicationcategory | 0-Belirlenecek | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | PbS | en_US |
dc.subject | Kimyasal banyo depozisyonu | en_US |
dc.subject | Pb(NO3)2 | en_US |
dc.subject | CS(NH2)2 | en_US |
dc.subject | Chemical Bath Deposition | en_US |
dc.title | Farklı molaritede Pb(No3)2 çözeltisi kullanılarak kimyasal banyo depolaması yöntemi ile elde edilen Pbs filmlerin bazı fiziksel özellikleri | en_US |
dc.title.alternative | Some physical properties of the Pbs films obtained by chemical bath deposition using different molarity Pb(No3)2 solution | en_US |
dc.type | Article | en_US |