INVESTIGATION OF REINFORCEMENT RATE AFFECTING MECHANICAL PROPERTIES AND MACHINABILITY IN Al-SiCp MMCs

Basit Öğe Kaydı
dc.contributor.authorKilickap, Erol
dc.contributor.authorOzben, Tamer
dc.contributor.authorCakir, Orhan
dc.date.accessioned2024-04-24T17:44:26Z
dc.date.available2024-04-24T17:44:26Z
dc.date.issued2006
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn this study, the effects of various rate of reinforcement materials (SiCp) addition to Al Si7 Mg2 metal matrix composite on mechanical properties and machinability were investigated. It was noticed that the mechanical properties increased with increasing added reinforcement materials rate in 5, 10 and 15 % SiCp reinforced metal matrix composite. The investigation of tool wear and surface roughness was carried out by using different cutting speeds (50, 100 and 150 m/min) and feed rate (0.1, 0.2 and 0.3 mm/rev) at constant depth of cut (1.5 mm) and reinforcement rates. It was observed that, tool wear and surface roughness increased when reinforcement material rate raised at using the same cutting speed and feed values. The tool life was a maximum when 15 % SiCp reinforced metal matrix composite was machined at 150 m/min of cutting speed. The highest surface roughness was also noticed at 15 % SiCp reinforced metal matrix composite machined at 50 m/min of cutting speed and 0.3 mm/rev of feed.en_US
dc.identifier.endpage320en_US
dc.identifier.issn1300-7009
dc.identifier.issn2147-5881
dc.identifier.issue3en_US
dc.identifier.startpage313en_US
dc.identifier.urihttps://hdl.handle.net/11468/22050
dc.identifier.volume12en_US
dc.identifier.wosWOS:000443126400003
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.language.isotren_US
dc.publisherPamukkale Univen_US
dc.relation.ispartofPamukkale University Journal of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMmcen_US
dc.subjectParticulate Reinforcementen_US
dc.subjectMachinabiltyen_US
dc.titleINVESTIGATION OF REINFORCEMENT RATE AFFECTING MECHANICAL PROPERTIES AND MACHINABILITY IN Al-SiCp MMCsen_US
dc.titleINVESTIGATION OF REINFORCEMENT RATE AFFECTING MECHANICAL PROPERTIES AND MACHINABILITY IN Al-SiCp MMCs
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu