Düşük dayanımlı betona sahip betonarme kısa kolonların kesme basınç göçmesinin incelenmesi

dc.contributor.advisorBedirhanoğlu, İdris
dc.contributor.authorŞeker, Mehmet
dc.date.accessioned2020-03-31T11:32:30Z
dc.date.available2020-03-31T11:32:30Z
dc.date.issued2019
dc.date.submitted2019-07-25
dc.departmentDicle Üniversitesi, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalıen_US
dc.descriptionLisansüstü tezlerin elektronik ortamda toplanması, düzenlenmesi ve erişime açılması konusuna ilişkin yök'ün 18.06.2018 tarihli yönergesine istinaden artık bu tarihten sonra gizlilik şartı aranmayan bütün tezler erişime açılacaktır.en_US
dc.description.abstractDeprem sırasında binanın hasar görmesinde etkin rol oynayan kusurların başında kısa kolon kesme dayanımı yetersizliği gelmektedir. Son yıllarda yaşadığımız depremlerden edindiğimiz tecrübelerimiz de göstermektedir ki deprem hasarlarına etriyelerin seyrek olması, kolon kesitlerinin küçük olması, beton dayanımlarının düşük olması, kolon serbest boylarının sonradan oluşturulan duvarlar nedeniyle düşürülmüş olması, kolonların kesme kapasitesi açısından epey yetersiz olmasına sebep olmaktadır. Bu çalışma kapsamında bu tür kolonların davranışları deneysel olarak incelenmiştir. Bu amaç ile mevcut kolonlardaki zayıflıkları temsil edecek şekilde dört adet numune üretilmiş ve deneye tabi tutulmuştur. İki adet numune TS 500 ve TBDY (2018)'e göre enine donatı bakımından yeterli olacak şekilde tasarlanmıştır. Kalan iki adet numune de yönetmeliğe ve standarda göre yetersiz enine donatı oranına sahip olacak şekilde tasarlanmıştır. Çalışma kapsamında ilk önce enine donatısı yönetmeliğe göre yeterli olan ve enine donatısı yönetmeliğe göre yetersiz olan birer adet referans numune test edilerek mevcut davranış incelenmiştir. Ardından kalan diğer iki numune de kesme açıklığı bölgesinde çelik plaka ve tamir harcıyla güçlendirilmiştir. Böylece güçlendirilmiş numuneler yatay kesme kuvveti performansı açısından referans numunelerle karşılaştırılmıştır. Numuneler düşeyde sabit eksenel yük ve yatayda da artan monotonik yüklemelere maruz bırakılmıştır. Bu deneyler sonucunda bu tür zayıflıklara sahip kısa kolonların davranışları ile ilgili önemli bilgiler elde edilmiştir. Kolonların davranışının adım adım izlenip hasar gelişiminin ne şekilde olduğunu takip edebilmek amacı ile yükleme statik ve monotonik artan bir şekilde uygulanmıştır. Sonuç olarak üretilen referans numunelerin beklendiği gibi kesme hasarı ile gevrek bir şekilde göçtüğü görülmüştür. Güçlendirilmiş numunelerde göçme içteki betonun ezilmesinden dolayı çelik plakaların kolon yüzeyinden ayrılması ile meydana görülmüştür.
dc.description.abstractShear strength deficiency of captive columns is one of the most important deficiencies in the damage of the building during the earthquake. Our experience gained from the earthquakes that we have experienced in recent years shows that common deficiencies for these members are sufficient stirrups, insufficient cross-sections, low strength concrete, change in the support conditions of columns where all these deficiencies cause decrease in shear strength of columns. In this study, the behaviors of such columns were investigated experimentally. For this purpose, four specimens were produced and tested to represent the weaknesses of the existing columns. Two equivalent specimens were designed to be sufficient in terms of transverse reinforcement according to TS 500 and TBDY (2018). The remaining two equivalent specimens are designed to have inadequate transverse reinforcement ratio according to regulations and standards. Within the scope of the study, firstly, two reference specimens where one of them is sufficient according to the transverse regulations and while the other was not, were tested and the existing behavior was examined. Then, the remaining two specimens were retrofitted with perforated steel plate and repair mortar in the shear span area. Thus, the retrofitted specimens were compared with the reference specimens in terms of shear strength and ductility. The specimens were subjected to constant axial load in vertical and increased monotonic loads in the horizontal directions. As a result of these experiments, important information on the behavior of captive columns with such weaknesses was obtained. In order to follow the behavior of the columns step by step and also can be able to follow the progress of the damage, the loading was increased in a static and monotonic manner. As a result, it was observed that the specimens produced had a brittle failure with shear damage as expected. As a result of the work on, important data accumulation and information about behavior of such columns has been obtained. The failure of the reinforced specimens were caused by the debonding and failure of the steel plates due to the crushing of the internal concrete.
dc.identifier.citationŞeker, M. (2019). Düşük dayanımlı betona sahip betonarme kısa kolonların kesme basınç göçmesinin incelenmesi. Yayımlanmamış yüksek lisans tezi, Dicle Üniversitesi, Diyarbakır.en_US
dc.identifier.urihttps://hdl.handle.net/11468/5152
dc.institutionauthorŞeker, Mehmet
dc.language.isotren_US
dc.publisherDicle Üniversitesi, Fen Bilimleri Enstitüsüen_US
dc.relation.publicationcategoryTezen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBetonarmeen_US
dc.subjectDüşük dayanımlı betonen_US
dc.subjectKısa kolonen_US
dc.subjectKesme basınç göçmesien_US
dc.subjectYetersiz etriyeen_US
dc.subjectReinforced concreteen_US
dc.subjectLow strength concreteen_US
dc.subjectCaptive columnen_US
dc.subjectInadequate stirrupen_US
dc.titleDüşük dayanımlı betona sahip betonarme kısa kolonların kesme basınç göçmesinin incelenmesien_US
dc.typeMaster Thesisen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
567909.pdf
Boyut:
9.2 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tez Dosyası
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.71 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: