Energy saving by prediction of the optimum cutting rate in stone cutting process: An industrial scale study

Basit Öğe Kaydı
dc.contributor.authorKarakus A.
dc.contributor.authorCeylanoglu A.
dc.contributor.authorGul Y.
dc.date.accessioned2024-04-24T18:45:48Z
dc.date.available2024-04-24T18:45:48Z
dc.date.issued2012
dc.departmentDicle Üniversitesien_US
dc.description.abstractSawing of rocks cost is controlled to a large extend by the cutting rate which is influenced by the properties of the saw and the sawn rock. Energy consumption is very important unit cost parameter, which strongly depends on cutting rate, in stone cutting process. In this study, in order to find the optimum cutting rate for Karacadag basalt units, primarily the properties of the basalts from four different regions were determined. After that, cutting experiments were carried out in three stages on four types of basalt units in a marble cutting plant with a special saw that is only used for cutting basalt. Based on specific energy, optimum cutting conditions were determined. It was found that the optimum cutting rate changes depending on the rock unit, cutting depth and the saw diameter. Optimum cutting rate, cutting depth, saw diameter and rock properties were evaluated using multiple regression analysis and models were developed. It was concluded that the optimum cutting rate can reliably be estimated using one of the developed models which were included cutting depth, saw diameter; and some rock properties, such as uniaxial compressive strength, Young's module, cohesion, Poisson's ratio and Schmidt hardness. © Sila Science.en_US
dc.identifier.endpage484en_US
dc.identifier.issn1308-772X
dc.identifier.issueSPEC .ISS.1en_US
dc.identifier.scopus2-s2.0-84885044043
dc.identifier.scopusqualityN/A
dc.identifier.startpage475en_US
dc.identifier.urihttps://hdl.handle.net/11468/24895
dc.identifier.volume30en_US
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.relation.ispartofEnergy Education Science and Technology Part A: Energy Science and Research
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBasaltic Rocksen_US
dc.subjectCutting Parametersen_US
dc.subjectEnergy Savingen_US
dc.subjectOptimum Cutting Rateen_US
dc.subjectSegment Wearen_US
dc.titleEnergy saving by prediction of the optimum cutting rate in stone cutting process: An industrial scale studyen_US
dc.titleEnergy saving by prediction of the optimum cutting rate in stone cutting process: An industrial scale study
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu