Study of etch rate and surface roughness in chemical etching of stainless steel

Basit Öğe Kaydı
dc.contributor.authorÇakir O.
dc.date.accessioned2024-04-24T18:45:39Z
dc.date.available2024-04-24T18:45:39Z
dc.date.issued2008
dc.departmentDicle Üniversitesien_US
dc.description.abstractIn this study, stainless steel material (X5CrNi1810) was micromachined by chemical etching method. Ferric chloride was selected as etchant which is the most widely used etchant for iron-based materials. Four different etchant concentrations (32°Bé, 36°Bé, 40°Bé and 44°Bé) were used at various etching temperature. Moreover, the influence of the addition of hydrochloric acid to main etchant on etching performance was examined. The aim of this study was to investigate the depth of etch and surface roughness affected by etchant concentration, hydrochloric acid addition and etching temperature. It was observed that etching temperature for any etchant concentration is important factor in case of depth of etch and surface roughness. It was also noticed that the addition of hydrochloric acid to main etchant increased depth of etch value at any etching temperature. The optimum etching parameters were obtained for the chemical etching of stainless steel.en_US
dc.identifier.endpage842en_US
dc.identifier.issn1013-9826
dc.identifier.scopus2-s2.0-38849104340
dc.identifier.scopusqualityQ4
dc.identifier.startpage837en_US
dc.identifier.urihttps://hdl.handle.net/11468/24761
dc.identifier.volume364-366 IIen_US
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherTrans Tech Publications Ltden_US
dc.relation.ispartofKey Engineering Materials
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectChemical Etchingen_US
dc.subjectDepth Of Etchen_US
dc.subjectFerric Chlorideen_US
dc.subjectStainless Steelen_US
dc.subjectSurface Roughnessen_US
dc.titleStudy of etch rate and surface roughness in chemical etching of stainless steelen_US
dc.titleStudy of etch rate and surface roughness in chemical etching of stainless steel
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu