Study of surface roughness in EDM

Basit Öğe Kaydı
dc.contributor.authorÇakir O.
dc.date.accessioned2024-04-24T18:45:39Z
dc.date.available2024-04-24T18:45:39Z
dc.date.issued2007
dc.departmentDicle Üniversitesien_US
dc.descriptionISAAT 2007 -- 25 September 2007 through 28 September 2007 -- Dearborn, MI-- 77339en_US
dc.description.abstractElectrical discharge machining (EDM) is widely accepted standard nontraditional machining process in the production of dies and molds. EDM is based on removing material from a workpiece by means of series repetitive electrical discharges between an electrode (tool) and a machined part in dielectric medium. The present study is devoted to examine the influences of EDM parameters on surface roughness. The selected EDM parameters were pulsed current (8, 16 and 24 A), pulse time (2, 4, 6, 12, 24, 48 and 100 ?s) and pulse pause time (2 and 3 ?s). The workpiece material was AISI 1040 steel. Experimental investigation was based on surface roughness of machined workpiece surface and used electrode. It was observed that the combination of low values of pulsed current and pulse time, and high pulse pause time produced a better surface finish quality.en_US
dc.identifier.scopus2-s2.0-77956303161
dc.identifier.scopusqualityN/A
dc.identifier.urihttps://hdl.handle.net/11468/24764
dc.identifier.volumeTP07PUB194en_US
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.relation.ispartofTechnical Paper - Society of Manufacturing Engineers
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCurrenten_US
dc.subjectEdmen_US
dc.subjectPulse Pause Timeen_US
dc.subjectPulse Timeen_US
dc.subjectSurface Roughnessen_US
dc.titleStudy of surface roughness in EDMen_US
dc.titleStudy of surface roughness in EDM
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu