Yazar "Canpolat, Mutlu" seçeneğine göre listele
Listeleniyor 1 - 10 / 10
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Adsorption of cobalt (II) ions from aqueous solution using orange peel waste: equilibrium, kinetic and thermodynamic studies(Springer, 2022) Altunkaynak, Yalçın; Canpolat, Mutlu; Yavuz, ÖmerThis study describes the evaluation of orange peel waste (OPW) to remove Co(II) ions from aqueous solutions. First, parameters such as pH, initial metal ion concentration, and contact time, which affect the adsorption efficiency, were studied. It was determined that the best initial Co(II) ion concentration, the adsorption contact and the solution pH were 125 mg/L, 100 min and 5.47, respectively. The surface properties of the orange peel were investigated using SEM, energy-dispersive spectroscopy, scanning and FTIR. The results showed that the isotherm data fit the Langmuir isotherm model, which corresponds to chemisorption and possible irreversibility of the process. The adsorption capacity for Co(II) was calculated to be 4.257, 4.491 and 5.128 mg/g at 298, 308 and 318 K, respectively. As a result of the adsorption kinetic data, it was determined that the adsorption of Co(II) metal ion conformed with the second-order kinetic model. Thermodynamic studies showed that the adsorption of Co(II) ion on orange peel is spontaneous and exothermic. It was shown that OPW can be used as an effective and alternative material in the removal of Co(II) ions from aqueous media due to its high capacity, easy availability and low cost.Öğe Adsorption of lead (II) ions on kaolinite from aqueous solutions: isothermal, kinetic, and thermodynamic studies(Springer Science and Business Media, 2023) Altunkaynak, Yalçın; Canpolat, Mutlu; Aslan, MehmetDue to industrial activity, heavy metal contamination is present in water, air, and soil around the world. Due to this circumstance, serious environmental issues arise. In this investigation, kaolin (NK), which was employed as an adsorbent, was transported from the beds in Karaçayır, Uşak, Turkey. Natural kaolin (NK) clay underwent batch processing to remove Pb2+. Investigations were done into how adsorption is impacted by contact duration, adsorbent dosage, temperature, and solution pH. Kaolin’s BET surface area was found to be 8.085 m2/g, while its pore volume was found to be 0.0537 cm3/g. The best working conditions were found to be a pH of 6.87 and an equilibrium period of 80 min. It was discovered that the Langmuir isotherm model was the most suitable one. At 298 K, 308 K, and 318 K, respectively, the adsorption capacities of NK were calculated to be 4.24, 5.69, and 6.08 mg/g. The removal capacity of Pb2+ solution by NK at a 200 mg/L concentration was found to be 42.4%, 56.9%, and 60.8%, respectively, depending on the temperature. The pseudo-second-order kinetic model agreed with this. It was revealed that NK had a maximum desorption efficiency of 93.07%. Through this process, the potential of NK as an eco-friendly adsorbent for heavy metal removal was shown.Öğe Adsorption of mercury (II) ions on kaolinite from aqueous solutions: Isothermal, kinetic, and thermodynamic studies(John Wiley and Sons Inc., 2023) Altunkaynak, Yalçın; Canpolat, Mutlu; Yavuz, ÖmerIndexed keywords SciVal Topics Abstract Due to industrial activity, heavy metal contamination is present in water, air, and soil around the world. Due to this circumstance, serious environmental issues arise. Natural kaolin (NK) clay underwent batch processing to remove Hg2+. Scanner electron microscopy (SEM), energy dispersion spectroscopy (EDS), x-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) were used to analyze the morphological and chemical characteristics of kaolin. Investigations were done into how adsorption is impacted by contact duration, adsorbent dosage, temperature, and solution pH. Kaolin's BET surface area was found to be 8.085 m2/g, while its pore volume was found to be 0.0537 cm3/g. The best working conditions were found to be pH 6.81 and an equilibrium period of 90 min. It was discovered that the Langmuir isotherm model was the most suitable one. At 298, 308, and 318 K, respectively, the adsorption capacities of NK were calculated to be 10.964, 10.515, and 10.101 mg/g. The pseudo-second-order kinetic model agreed with this. It was revealed that NK had a maximum desorption efficiency of 91.36%. Through this process, the potential of NK as an eco-friendly adsorbent for heavy metal removal was shown.Öğe Bakır(II) İyonlarının Sulu Çözeltilerden Atık Portakal Kabuğu İle Uzaklaştırılması: Denge, Kinetik Ve Termodinamik Çalışmalar(2022) Altunkaynak, Yalçın; Canpolat, Mutlu; Yavuz, OmerBu çalışmada, sulu çözeltilerden Cu2+ iyonlarını uzaklaştırmak amacıyla atık portakal kabuğu (APK) değerlendirildi. Portakal kabuğunun karakterizasyonu, yüzey morfolojisi için taramalı elektron mikroskobu-enerji dağılım spektroskopisi (SEM-EDS) ve yüzey fonksiyonel grupları için Fourier dönüşümü kızılötesi spektroskopisi (FT-IR) ile incelendi. Farklı sıcaklıklarda bulunan kinetik değerler yalancı birinci derece, yalancı ikinci derece, Elovich ve parçacık içi difüzyon modeli denklemlerine uygulanmıştır. Adsorpsiyon sürecini daha iyi anlamak için Langmuir, Freundlich, Temkin ve Dubinin-Radushkevich (D-R) adsorpsiyon izotermlerinin uygulanabilirliği değerlendirildi. Bakırın uzaklaştırılması yalancı ikinci dereceden kinetik model ile Langmuir izoterm modelini takip etti. Cu2+ için uzaklaştırma kapasitesi 298, 308 ve 318 K'de sırasıyla 7.74, 7.98 ve 8.84 mg/g olarak elde edilmiştir. Cu2+ iyonlarının Gibbs serbest enerjisi (?Go), adsorpsiyon ısısı (?Ho) ve entropisi (?So) için termodinamik veriler sırasıyla -16.76 kj/mol, 29.43 kj/mol ve 154.79 j/mol olarak bulundu.Öğe Kimyasal olarak işlenmemiş Midyat taşı kullanılarak sulu çözeltilerden Pb(II) iyonlarının etkin bir şekilde uzaklaştırılması: İzoterm, kinetik ve termodinamik çalışmalar(Niğde Ömer Halisdemir Üniversitesi, 2022) Canpolat, Mutlu; Altunkaynak, Yalçın; Yavuz, ÖmerEndüstriyel atıklardan ağır metallerin uzaklaştırılması bilim insanlarının çözüm aradığı en önemli konulardan biridir. Bu araştırma, sulu çözeltilerden Pb2+ iyonlarının adsorpsiyonu için Midyat taşının (MT) değerlendirilmesini inceliyor. Çalışmada, temas süresi, başlangıç metal iyon konsantrasyonu, pH gibi çeşitli değişkenlerin adsorpsiyon verimliliği üzerindeki sonuçları araştırıldı. MT'nin yüzey özellikleri taramalı elektron mikroskobu, enerji dağılım spektroskopisi ve Fourier dönüşümlü kızılötesi spektroskopisi ile araştırıldı. Pb2+ iyonunun uzaklaştırılması için en uygun çalışma koşullarında başlangıç konsantrasyonu, temas süresi ve çözelti pH'ı sırasıyla 800 mg/L, 90 dakika ve 4,23 olarak belirlendi. Sonuçlar, izoterm verilerinin Langmuir izoterm modeli için, kinetik verileri için de Yalancı birinci dereceden kinetik modeline (PSO) uygun olduğunu göstermiştir. Pb2+ iyonu için adsorpsiyon kapasitesi 298, 308 ve 318 K'da sırasıyla 129.87 mg/g, 178.57 mg/g ve 188.68 mg/g olarak hesaplandı. Termodinamik çalışmalar, MT yoluyla Pb2+ iyonunun uzaklaştırılmasının doğal ve endotermik olduğunu göstermiştir. MT'nin sahip olduğu yüksek adsorpsiyon kapasitesi, ucuz ve kolay bulunabilmesi gibi özelliklerinden dolayı Pb2+ iyonlarının sulu ortamdan uzaklaştırılmasında etkili ve gelecek vaat eden bir malzeme olduğu tespit edilmiştir.Öğe Kinetic and Thermodynamic Studies on the Use of Waste Orange Peel in the Removal of Pb2+ Ions from Aqueous Solutions(Düzce Üniversitesi, 2023) Altunkaynak, Yalçın; Canpolat, Mutlu; Yavuz, ÖmerThis study demonstrated the efficacy of leftover orange peel in removing Pb2+ ions from aqueous solutions. The effects of contact time, starting metal ion concentration, and pH on adsorption effectiveness were investigated. A starting concentration of 800 mg/L, a contact time of 90 minutes, and a solution pH of 4.32 were found to be the best working conditions for the removal of the Pb2+ ion. In order to examine the surface characteristics of the orange peel, SEM, energy dispersion spectroscopy, and Fourier transform infrared spectroscopy were all used (FT-IR). The outcomes showed that the isotherm data was sufficient for the Langmuir isotherm model, which deals with chemical adsorption and the likely irreversibility of the process. The Pb2+ ion's adsorption capacity was found to be 35.842, 35.714, and 35.087 mg/g at 318, 308, and 298 K, respectively. Pseudo-second order, which had the highest coefficient of regression and best described the kinetic data for Pb2+ adsorption. Thermodynamic investigations revealed that the removal of the Pb2+ ion from orange peel was a natural and exothermic process. Due to its great taking away capability, leftover orange peel has been discovered to be an effective and promising material for the absorption of Pb2+ ions from the aqueous environment. It is also simple to get and inexpensive.Öğe Sulu Çözeltilerden Pb2+ İyonlarının Uzaklaştırılmasında Atık Portakal Kabuklarının Kullanılması: Kinetik ve Termodinamik Çalışmalar(2023) Altunkaynak, Yalçın; Canpolat, Mutlu; Yavuz, ÖmerBu çalışmada, Pb2+ iyonlarının sulu çözeltilerden uzaklaştırılmasında atık portakal kabuğunun (APK) etkin bir şekilde değerlendirilmesi ve geri dönüşüme kazandırılması anlatılmaktadır. Adsorpsiyon verimliliği için; metal iyonu başlangıç derişimi, temas süresi, pH etkisi gibi farklı parametrelerin sonuçları incelendi. Pb2+ iyonunun uzaklaştırılmasında en uygun çalışma koşulları; metal iyonu başlangıç derişimi 800 mg/L, temas süresi 90 dakika ve çözelti pH'ı 4,32 olarak belirlendi. APK’nın yüzey özellikleri, Fourier dönüşümlü kızılötesi spektroskopisi (FTIR), taramalı elektron mikroskobu (SEM) ve enerji dağılım spektroskopisi ile araştırıldı. Elde edilen veriler (izoterm verileri) incelendiğinde, işlemin olası tersinmezliğine ve kimyasal adsorpsiyona karşılık gelen Langmuir izoterm modeline uygun olduğunu gösterdi. 298, 308 ve 318 K'de Pb2+ iyonu için adsorpsiyon kapasitesi sırasıyla 35,842, 35,714 ve 35,087 mg/g olarak hesaplandı. En iyi kinetik veriler, Pb2+ adsorpsiyonu için en yüksek regresyon katsayısına sahip yalancı ikinci dereceden denklem ile tanımlandı. Termodinamik çalışmalar, APK kullanılarak Pb2+ iyonlarının uzaklaştırılması işleminin doğal ve endotermik bir süreç olduğunu gösterdi. APK 'nın yüksek uzaklaştırma kapasitesi, kolay bulunması ve ucuz olması nedeniyle sulu ortamdan Pb2+ iyonlarının uzaklaştırılmasında etkili ve umut verici bir malzeme olduğu tespit edildi.Öğe Synthesis, characterization of cross-linked poly(ethylene glycol dimethacrylate-methyl methacrylate-N-(1-phenylethyl) acrylamide) copolymer and removal of copper(II), cobalt(II) ions from aqueous solutions via this copolymer(John Wiley and Sons Inc., 2023) Canpolat, Mutlu; Topal, GirayThis study investigates the synthesis and evaluation of a new polymeric adsorbent for adsorbing Cu2+ and Co2+ ions from aqueous solutions. In this study, R-(+)-methylbenzylamine and acryloyl chloride were used to synthesize N-(1-phenylethyl)-acrylamide (PEA) monomer, and the synthesized PEA was characterized by FTIR, 1H-NMR and 13C-NMR. Then, using PEA, ethylene glycol dimethacrylate (EGDMA) and methyl methacrylate (MMA) monomers by radical polymerization reaction, cross-linked poly(ethylene glycol dimethacrylate-methyl methacrylate-N-(1-phenylethyl)acrylamide) (poly(EGDMA-co- MMA-co-PEA) copolymer was obtained. FTIR, solid-NMR, and elemental analysis methods were used to characterize the poly(EGDMA-co-MMA-co-PEA) obtained. Poly(EGDMA-co-MMA)-co-PEA) copolymer was used as an adsorbent in the final stage of the study to remove copper (Cu2+) and cobalt (Co2+) ions from aqueous solutions. The study examined the effects of various variables including contact time, initial metal ion concentration, and pH on adsorption efficiency. The initial concentration, contact time, and solution pH that were found to be most effective for Cu2+ ion removal were 1000 mg/L, 20 min, and 6, respectively. The ideal working parameters for Co2+ removal were determined to be an initial concentration of 1000 mg/L, a contact period of 50 min, and a solution with a pH of 6. While the adsorption capacity of Cu2+ was 185.44 mg/g at 25°C, the adsorption capacity of Co2+ was 123.76 mg/g under the same conditions. The kinetic data were best described by the theoretical adsorption capacity, which was close to the experimentally determined value for the adsorption of Cu2+ and Co2+ ions, and the pseudo-second-order with the highest regression coefficient.Öğe THE PREPARATION OF A NEW PROTEIN BASED HPLC COLUMN PACKING MATERIAL AND ENANTIOMERIC RESOLUTION OF SOME PHARMACEUTICAL RELATED COMPOUNDS VIA THIS COLUMN(Bilal GÜMÜŞ, 2016) Erdoğan, Ömer; Topal, Giray; Çakmak, Reşit; Sünkür, Murat; Canpolat, MutluIn this study, BSA was bounded to 3-chloropropyl functionalized silica gel via ethylenediamine and glutaric dialdehyde. The prepared CSP was packed into 150X4.6mm HPLC column according to slurry method. The enantiomeric resolution of some pharmaceutical related compounds such as rac-mandelic acid, rac-methyl mandelate, rac-epinephrine, rac-propranolol, rac-?-phenylethylamine and rac-3-hydroxybutyric acid was employed in 1mL/rpm, 1,5mL/rpm, 2mL/rpm, 2,5mL/rpm, 3mL/rpm flow rate in various pHs such pH=6, pH=7, pH=8 0,1M phosphate buffer. Chromatographic parameters such as Rs and ? were calculated for each resoluted compounds.Öğe Yeni çapraz bağlı kiral poliakrilamit türevlerinin sentezlenmesi ve Cu(II), Ni(II), Co(II) iyonlarının sulu çözeltilerden adsorpsiyonunda kullanılması(Dicle Üniversitesi, Fen Bilimleri Enstitüsü, 2020) Canpolat, Mutlu; Topal, GirayBu çalışmada, öncelikle iki yeni akrilamit monomeri elde edilmiştir. Bunlardan birincisi N-(1-feniletil) akrilamit monomeri ikincisi ise N-akriloil-L-triptofan'dır. Bundan sonra her bir monomerin, çapraz bağlayıcı etilen glikol dimetakrilat (EGDMA) monomeri ve metil metakrilat (MMA) monomeri ile çapraz bağlı kopolimerleri sentezlendi. Bu sentezlerde başlatıcı olarak benzoil peroksit (BPO), düzenleyici olarak da poivinilalkol (PVAL) kullanıldı. Elde edilen bu çapraz bağlı kopolimerler poli(EGDMA-ko-MMA-ko-N-(1-feniletil)akrilamit) ve Poli(EGDMA-ko-MMA-ko-N-akriloil-L-triptofan). Sentezlenen monomer ve polimerler FT-IR, 1H-NMR, 13C-NMR, katı-NMR, elementel analiz ve TGA/DTA teknikleri ile karakterize edildi. Çalışmanın ikinci aşamasında, sulu çözeltilerden Cu(II), Ni(II) ve Co(II) iyonlarının adsorpsiyon yöntemiyle poli(EGDMA-ko-MMA-ko-N-(1-feniletil)akrilamit) ve poli(EGDMA-ko-MMA-ko-N-akriloil-L-triptofan) çapraz bağlı kopolimerleri ile uzaklaştırılması araştırıldı. Adsorpsiyon verimini etkileyen pH, başlangıç çözelti derişimi ve temas süresi parametreleri araştırıldı. Her üç iyon için kinetik incelemeler yapıldı. Elde edilen kinetik veriler Lagergren, Ho Mc Kay, Weber Morris ve Elovich denklemlerine uygulandı. Her iki çapraz bağlı kopolimer ile yapılan kinetik deneysel veriler bakır, nikel ve kobalt iyonlarının Ho Mc Kay hız denklemine uyduğu gösterildi. Çalışmanın son kısmında ise, çapraz bağlı kopolimerlere adsorplanan metal iyonlarının desorpsiyonu ve bu kopolimerlerin tekrar kullanılabilirlikleri incelendi.