Computer-Aided Mold Design Algorithm for Precast Concrete Elements

Basit Öğe Kaydı
dc.contributor.authorAktas, Gultekin
dc.contributor.authorTanrikulu, Ahmed Kamil
dc.contributor.authorBaran, Tarik
dc.date.accessioned2024-04-24T17:33:24Z
dc.date.available2024-04-24T17:33:24Z
dc.date.issued2014
dc.departmentDicle Üniversitesien_US
dc.description.abstractThis paper aims to determine a computer-aided mold design algorithm for precast concrete products to be produced by external vibrators. For this purpose, the behaviors of two different precast concrete molds were investigated experimentally and analytically. Experiments were performed under vibration with the use of a computer-based data acquisition system. Transducers were used to measure time-dependent lateral displacements at some points on the mold while it is empty and full of fresh concrete. Test results indicate that the difference between displacement amplitudes of empty and full molds is considerably high. Three-dimensional analytical modeling of molds used in experiments was prepared by finite element method using software. Modeling of the full mold was made to solve the problem of dynamic interaction of fresh concrete mold. In light of experimental, numerical, and literature studies, a mold design algorithm was established for precast concrete elements. Using this algorithm, a computer-aided mold design was carried out theoretically for a sample mold system.en_US
dc.identifier.endpage87en_US
dc.identifier.issn0889-325X
dc.identifier.issn1944-737X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84893694549
dc.identifier.scopusqualityQ2
dc.identifier.startpage77en_US
dc.identifier.urihttps://hdl.handle.net/11468/20667
dc.identifier.volume111en_US
dc.identifier.wosWOS:000331155700008
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.publisherAmer Concrete Insten_US
dc.relation.ispartofAci Materials Journal
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCompaction Of Fresh Concreteen_US
dc.subjectComputer-Aided Mold Design Algorithmen_US
dc.subjectDisplacement Transduceren_US
dc.subjectDynamic Interactionen_US
dc.subjectFinite Element Methoden_US
dc.subjectMeasuring Instrumentsen_US
dc.subjectModelingen_US
dc.subjectPrecast Concrete Molden_US
dc.subjectVibrationen_US
dc.titleComputer-Aided Mold Design Algorithm for Precast Concrete Elementsen_US
dc.titleComputer-Aided Mold Design Algorithm for Precast Concrete Elements
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu