Modelling of the solar cell based CU2SNS3 thin film produced by spray pyrolysis
Yükleniyor...
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
International Engineering, Science and Education Group
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Cu2SnS3 (CTS) thin film has been produced for 30 ccm sulphur flux rate at 30 minutes annealing durations at 550 oC temperature.CTS thin film’s crystalline structure has been investigated and crystalline size, lattice parameters, dislocation density and microstrain, crystalline number have also been determined.The CTS thin film’s morphological and optical properties have been examined and thoroughly interpreted.Mo/CTS/CdS/AZO solar cell has been modelled based on CTS thin film produced at the present work, using SCAPS-1D simulation programme.Voc, Jsc, FF, conversion efficiency and photovoltaic parameters have been determined depending on neutral defect density at the interface, coefficient of radiative recombination, Auger electron/hole capture’s coefficient and operation temperature of CTS solar cell.As a consequence of simulation study, ideal efficiency of CTS solar cell has been determined to be 3.72 % and all the data obtained in this study have been presented, interpreted and concluded to be original results.
Açıklama
Anahtar Kelimeler
CTS, Solar cell, SCAPS-1D, Simulation
Kaynak
Middle East Journal of Science
WoS Q Değeri
Scopus Q Değeri
Cilt
8
Sayı
1
Künye
Gezgin, S. Y., Candan, İ., Baturay, Ş. ve Kılıç, H. Ş. (2022). Modelling of the solar cell based Cu2SnS3 thin film produced by spray pyrolysis. Middle East Journal of Science, 8(1), 64-76.
