Energy and exergy analyses of a solar air heater with wire mesh-covered absorber plate
[ X ]
Tarih
2018
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Inderscience Enterprises Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Thermodynamic analysis on a novel design of solar air heater (SAH) having absorber plate covered with copper wire mesh was presented in this study. The newly-designed collector was tested for various air flow rates and tilt angles of the collector. The study was carried out for mass flow rates of 0.030 kg/s and 0.055 kg/s as well as collector tilt angles of 25 degrees and 35 degrees. Thermal efficiency, thermo-hydraulic efficiency and exergetic efficiency were computed by using experimental data. The results indicated that temperature at the outlet of collector, useful heat amount and pressure loss through collector were increased for higher mass flow rate and smaller collector tilt angle. Thermal efficiency of collectors was in the range of 34-82%, thermo-hydraulic efficiency was 25-66% and exergetic efficiency was 3.70-9.65% depending on the studied case. It may be suggested that greater mass flow rate and the lower tilt angle can lead to remarkable improvements in thermal and exergetic efficiencies of SAH with wire mesh on its absorber plate.
Açıklama
9th International Exergy, Energy and Environment Symposium (IEEES) -- MAY 14-17, 2017 -- Split, CROATIA
Anahtar Kelimeler
Sah, Solar Air Heater, Wire Mesh, Exergy, Thermal Efficiency
Kaynak
International Journal of Exergy
WoS Q Değeri
Q3
Scopus Q Değeri
Q3
Cilt
26
Sayı
1-2
