A study on machinability of Al Si7 Mg2/SiCp metal matrix composite

Basit Öğe Kaydı
dc.contributor.authorKılıçkap, Erol
dc.contributor.authorİnan, Ali
dc.date.accessioned2024-04-24T17:56:42Z
dc.date.available2024-04-24T17:56:42Z
dc.date.issued2006
dc.departmentDicle Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractThis paper presents the result of an experimental investigation on the machinability of silicon carbide (SiC) particulate Al Si7 Mg2 Metal Matrix Composite (MMC) during turning using fixed WC insert (TiN coated and uncoated). Al Si7 Mg2 alloy composites contain various particle sizes (10-32 ?m) of 15 wt.% SiCp were prepared by squeeze casting method. Optical microscopic examination, hardness, density, tensile strength and impact toughness measurement were carried out. The influence of machining parameters, for example, cutting speed, feed and depth of cut on tool wear and surface roughness were investigated during the experimentation. Test results show BUE is formed during machining of Al Si7 Mg2/SiCp-MMC at low cutting speed, low feed and high depth of cut. In without coolant turning condition, the tool wear was mainly affected by cutting speed, increased with higher cutting speed. Meanwhile, surface roughness was influenced with combination of feed and cutting speed.en_US
dc.identifier.citationKılıçkap, E. ve İnan, A. (2006). A study on machinability of Al Si7 Mg2/SiCp metal matrix composite. International Journal of Machining and Machinability of Materials, 1(4), 463-475.
dc.identifier.doi10.1504/IJMMM.2006.012353
dc.identifier.endpage475en_US
dc.identifier.issn1748-5711
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-84870330001
dc.identifier.scopusqualityQ2
dc.identifier.startpage463en_US
dc.identifier.urihttps://doi.org/10.1504/IJMMM.2006.012353
dc.identifier.urihttps://hdl.handle.net/11468/23628
dc.identifier.volume1en_US
dc.indekslendigikaynakScopus
dc.language.isoenen_US
dc.relation.ispartofInternational Journal of Machining and Machinability of Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMachiningen_US
dc.subjectMetal Matrix Composite (Mmc)en_US
dc.subjectSurface roughnessen_US
dc.subjectTool wearen_US
dc.titleA study on machinability of Al Si7 Mg2/SiCp metal matrix compositeen_US
dc.titleA study on machinability of Al Si7 Mg2/SiCp metal matrix composite
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu