İnşaatlarda ön tehlike analizi (ÖTA) ile risk değerlendirmesi

[ X ]

Tarih

2017

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

Amaç: Bu araştırmada farklı aşamalardaki uygulanan ön tehlike analizleri ile inşaat işlerinde risk değerlendirmesi çalışmaları erken aşamalarda geliştirilecek güvenlik önlemleri açısından özellikle üst yapı inşaatları olmak üzere sektöre katkı verilmesi amaçlanmıştır. Gereç ve Yöntem: İnşaat sahasındaki teknik kadro ve iş sağlığı ve güvenliği profesyonelleri ile görüşmeler yapılarak saha personelinin fikirleri alınmış ve işyerlerinde gerekli veri toplandıktan sonra ön tehlike analizi yürütülmüş elde edilen sonuçlar değerlendirilmiştir. Risk değerlendirmesi çalışmalarında Fine-Kinney metodu kullanılmıştır. Bulgular: Araştırmanın başlanıldığı tarihlerde inşaat sahası kaba işlerin yaklaşık %65’ı tamamlanmıştı. 6 aydır imalatların devam etmekte olduğu inşaat sahası iş yerinde görevli iş güvenliği koordinatörü ile görüşülerek şantiyede meydana gelmiş iş kazası ve ramak kala olayların kayıtları incelenmiştir. İncelenen bu raporlarda sahada yaşanan iş kazaları; Yüksekten düşme, Malzeme düşmesi, Elektrik çarpması, Uzuv kaybı, Uzuv sıkışması/ezilmesi, Yangın, Çalışana malzeme çarpması, Göz parça sıçraması, Araç ve iş makinesi kazası, Dolgu malzemesinin çökmesi görülmüştür. Sonuç: Ön tehlike analizi ile belirlenen tehlikelerin ortadan kaldırılması için geliştirilen kontrol önlemlerinden Kat kenarlarına yaklaşmayı önlemek için tünel kalıp imalatında beton duvarlar boşluk bırakılarak kat boyunca çelik halat çekilmiştir. Çelik halatlar duvar işleri esnasında kat kenarları boyunca yatay yaşam hattı olarak kullanılmış ve çalışanlar tam vücut tipi emniyet kemerlerini bu yaşam hatlarına bağlayarak çalışmışlardır. Merdiven boşluklarında yüksekten düşmeyi önlemek için basamakta betona çelik kancalarla bağlanmış güvenlik ağları kullanılmıştır. Asansör boşlukları ve kat boşlukları çift sıra çelik halat kapatılarak düşmeye karşı önlem alınmıştır. İnşaat kat kenarlarında meydana gelen yüksekten düşmelerin önlenmesi için kat kenarları boyunca çift sıra çelik halat çekilmiştir. Anahtar Sözcükler: Ön tehlike analizi, risk değerlendirmesi, inşaatlarda iş sağlığı ve güvenliği

Aim: In this research, it is aimed to give contributions to the sector, especially the superstructure construction, in terms of preliminary hazard analyzes applied at different stages, risk assessment studies in construction works, and security measures to be developed in the early stages. Materials and Methods: After consultation with the technical staff of the construction site and professional health and safety professionals, the opinions of the field personnel were taken and the preliminary hazard analysis was carried out after the necessary data was collected at the workplaces and the results obtained were evaluated. In the risk assessment studies, the Fine-Kinney method was used. Results: Approximately 65% of the rough construction works were completed on the dates when the research started. We have been interviewed with the job security coordinator at the construction site where the production 6 months and the records of the work accidents and ramak kala events that have been happening at the site were investigated. In these reports examined, occupational accidents at the scene; Fire, Worker material hit, Eye piece jumper, Vehicle and work machine accident, Crash of filling material is seen as the collapse of the filling material. Conclusion: Control measures developed to remove the hazards identified by the preliminary hazard analysis. Steel rope was pulled along the floors by leaving a space in the concrete walls in tunnel mold manufacturing to prevent approach to the floor edges. Steel ropes were also used as horizontal lifeline along the edges of the floors during wall work, and workers worked by connecting full body type safety belts to these life lines. Safety nets are used in the stairwells with steel hooks attached to each step to prevent high falls. The elevator gaps and floor gaps were closed with double row steel rope to prevent falling. A double row of steel rope is pulled along the edges of the floors to prevent high falls from the slopes on the construction floor edges. Keywords: Preliminary hazard analysis, risk assessment, occupational health and safety in constructions,

Açıklama

Bu çalışma "Tezsiz Yüksek Lisans Dönem Projesi" olarak hazırlanmıştır.

Anahtar Kelimeler

Ön tehlike analizi, Risk değerlendirmesi, İnşaatlarda iş sağlığı ve güvenliği, Preliminary hazard analysis, Risk assessment, Occupational health and safety in constructions

Kaynak

WoS Q Değeri

Scopus Q Değeri

Cilt

Sayı

Künye